Search By Manufacture

BAIKER (CH) (1) Other (6) VARI (1)

Search By Country

Germany (1) Other (7)

advanced filter

  •
    Washing and Degreasing
    Germany
    Manufacturer:
    BAIKER (CH)
    Model:
    BAIKER (CH) 1300
    Description:
    Injector Sandblasting Cabin with manual Manipulation

    More Info

  • Washing and Degreasing
    Model:
    PTC HYDRODYNAMIC UNIT
    Description:
    PTC 09762 MOD. KAMAT K10016A HIGH PRESSURE ENGINE IVECO N67MSTD20: Max 2300 rpm - kW 129 calibrated at 2000 rpm - kW 110 PUMP KAMAT K 10016 A: Pistons diam. mm 16 Flow rate lt/min 27 Pressure bar 2500 Input power kW 130 UNIT DIMENSIONS: Length mm 330...

    More Info

  • Washing and Degreasing
    Manufacturer:
    VARI
    Model:
    Tongue and Groove Vario Jaws
    Description:
    Cylindrical and cubic workpieces can be clamped with the Vario jaw. The clamping inserts can be placed at different points of the jaw, thus can be covered with a jaw set a large range of parts. By exchanging the clamping inserts both raw parts and wo...

    More Info

  • Washing and Degreasing
    Model:
    Tongue and Groove Step Jaws
    Description:
    Tongue and Groove Step Jaws For clamping workpieces that must not be damaged. The clamping surface is grooved and not ribbed. This results in reducing the potential for marking components. The stepped jaw is hardened approx. 0.2 mm deep. The accuracy...

    More Info

  • Washing and Degreasing
    Model:
    Tongue and Groove Soft Jaws
    Description:
    Soft jaws allow for forming of jaws and subsequent clamping of molded parts which must not have clamping marks on the workpiece surface. Steel jaws are case hardenable for the jaws to be hardened for longevity after machining.

    More Info

  • Washing and Degreasing
    Model:
    Tongue and Groove Prism Jaws
    Description:
    For clamping workpieces that must not be damaged. The clamping surface is grooved and not ribbed. This results in reducing the potential for marking components. The stepped jaw is hardened approx. 0.2 mm deep. The accuracy of the surface with respect...

    More Info

  • Washing and Degreasing
    Model:
    Tongue and Groove Step Jaws w/ Inserts
    Description:
    For clamping different materials for the optionally three different clamping inserts are available. The use of teeth results in a high surface pressure whereby maximum holding forces are achieved. In the case of wear of the Mastergrip clamping claws ...

    More Info

  • Washing and Degreasing
    Model:
    Tongue and Groove 5-Axis Jaws
    Description:
    5-Axis jaws provide the component with a lot more height creating more clearance for tools in 5 axis applications. Serrated surface means that component can be held on less material resulting in less waste material.

    More Info

SEND ENQUIRY

*I AM A
Dealer
End User