Home > Associated Products > Tooling Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • V391
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

The Darex V391 Drill Sharpener is Priced right for small shops - even very small shops can economically sharpen their own drills in real time. it incorporates much of the same technology in the more advanced machines It is the perfect choice for shops that need a sharpener for intermittent use. It's simple, intuitive design gives everyone access to sharp drills when you need them. The Darex V391 Drill Sharpener comes standard with a CBN grinding wheel for HSS drills and an additional diamond wheel is available for carbide drills. and is adjustable for point angle, relief angle, point split angle and depth as well as stock removal and no tools are required for any adjustments on the machine. there is an optional vacuum accessory which attaches to the vacuum port. If vacuum is not used, the V391 features a grit tray for dust collection.   Duty Rating: Light duty, intermittent use Grit Removal System: Optional vacuum Cutting Tool Diameter: 3–19 mm Options Available: Morse Taper chuck Operation Mode: Manual Machine Weight: 11 kg Point Angles Sharpened: 118°–140° Machine Size: 30 x 28 x 23 cm Point Styles Sharpened: Standard conic and split point Sharpening Wheel Included: Borazon (CBN) for HSS & cobalt (diamond option for carbide available)Remove reference to diamond wheel Power: 3 amps at 230V; 3450 rpm
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      Plain Rectangular Tooling Column
      Description:
      Cast iron plain tooling cube with mounting holes. Plain to allow for the machining of hole patterns and features required for specific fixtures. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and...

      More Info

    • United Kingdom
      Manufacturer:
      Eppinger
      Model:
      Used BMT55 Angular Driven Tool Holder for CNC Lathes (4389)
      Description:
      Used BMT55 Angular Driven Tool Holder for CNC Lathes, Eppinger preci-flex, Length of drive to the end of the tang - 103mm

      More Info

    • Manufacturer:
      Model:
      System 5 12/16 station MultiLOK
      Description:
      Multiloks are the easiest way to apply the versatility of System 5 to a horizontal milling machine. They are the most versatile products of their kind. They can take full advantage of your horizontal CNC machine by providing the accessibility of mult...

      More Info

    • Manufacturer:
      Model:
      OK-VISE Self-Adjustable Clamp
      Description:
      The DK2-VT-B clamp has a self-adjustable steel ball inserted into both of the clamp jaws. The steel ball is equipped with torsion protection, allowing the ball to self-adjust up to 9 degrees. This makes clamping inaccurate parts and castings more fle...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User