Home > Associated Products > Collet Blocks Go Back
REQUEST PRICE

Pullback Collet Chuck (16C)

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • Collet

    Model:

  • Pullback Collet Chuck (16C)

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
The gripping pull-back action of our Pullback Collet Chuck (16C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      Kopal Mono-Bloc
      Description:
      One of the fastest and strongest milling clamps available anywhere, these clamps are easily set up and broken down, making them ideal for odd-shaped parts and short cycle times. The worm-and-gear design ensures that the clamp will not loosen with use...

      More Info

    • Manufacturer:
      Collet
      Model:
      Collet Changing Gun
      Description:
      DCD collet changing gun are required for the changing of DC collets. The gun collapses the collet down so it can be placed into the collet and released into position.

      More Info

    • Manufacturer:
      Collet
      Model:
      Seal Blanks for Collet Chucks
      Description:
      Attached to the front of the quick change cap, the seal blank can be cut to suit the size of bar required. The seal then reduces the potential for swarf and coolant to go down the spindle.

      More Info

    • Manufacturer:
      Collet
      Model:
      Pullback Collet Chuck (5C)
      Description:
      The gripping pull-back action of our Pullback Collet Chuck (5C) to actuate the collet chuck. Means the workpiece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be dete...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User