MITUTOYO
07872
With horizontal optical system and screen diam. mm 356
Measurement of workpieces with weigth to Kg 45
Plan XY mm 203x102
EQUIPPED WITH:
-DRO 2-axis
-DRO support
USED MACHINE
YOP 2010
Clamps designed to be easily incorporated into fixtures. The majority of the Dyna-Force® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an angle for positive...
CMR
07544
Drilling capacity on steel mm 55
Drilling capacity on cast iron mm 55
Max distance between spindle axis and column 1600, min 350 mm
Max distance between spindle nose and base 1250, min 350 mm
Travel of head mm 1250
Taper CM5
Speed n. 12, 36...
Heavy cutting lathe with spindle nose A2-11 for turning length from 1250mm to 4250mm. Bar capacity 91mm, Spindle speed 2500rpm. Single piece cast slant bed (45-degree) for minimum distance from ball screw to the tool tip Spindle bore A2-11 with hydra...
Press capacity: 400 ton
Ram stroke: 150 mm
Slide adjustment: 175 mm
Shut height (stroke down,adjustment up):895 mm
Free lateral opening F-B: 900 mm
Table surface area : 2.000 x 1.250 mm
Slide area: 2.000 x 1.200 mm
Hole in table: 1.7...