Specification |
|
| Table size | 2000 x 460mm |
| Number of T slots | 5 |
| Width of T slots | 18mm |
| Distance between slots | 80mm |
| Longitudinal travel | 1500mm |
| Vertical travel (knee) | 440mm |
| Cross travel (ram) | 650mm |
| Min. spindle nose to table surface | 40mm |
| Swivel angle of milling head | any angle |
| Spindle taper | 50 INT |
| Spindle speeds | 27 |
| Spindle speed range | 30-2050 rpm |
| Longitudinal power feeds (inf. variable) | 10/1000 mm/min |
| Cross (RAM) power feeds (inf. variable) | 10/1000 mm/min |
| Vertical power feeds (inf. variable) | 5-500mm/min |
| Longitudinal rapid feed rate | 2800mm/min |
| Cross rapid feed rate | 2800mm/min |
| Vertical rapid feed rate | 1400mm/min |
| Spindle motor | 7.5 kw |
| Maximum table load | 1800 kg |
| Overall dimensions | 2010 x 2986 x 1950mm |
| Approx. nett weight | 3700 kg |
| Voltage | 415v/50Hz/3 phase |
| Machines in metric execution only |
Machine equipped with: |
| Acurite 200S 3 Axis LCD Digital Readout System |
| ISO 50 spindle taper allowing a wide variety of tooling to be used |
| Turcite slideway linings giving improved cutting performance, low slideway stiction and low wear |
| PLC Controls |
| DC servo feed drive to all axes via fully covered recirculating ballscrews, giving infinitely variable speeds |
| Dual handwheels allow the machine to be operated from either side of the knee |
| Automatic lubrication system |
| Heavy duty knee supports utilising double locking |
| Heavy table loads of up to l800 kg can be easily accommodated |
| Pendant mounted remote control panel |
| Complies fully with current EC Machinery Directives (CE Mark) |
| Colour Grey |
| EMC Tested |
| Coolant equipment |
