Julia coated HSS circular saw blades using a P.V.D. multi-layer coating with a thickness of 2.5 µm opaque grey coloured. The particular and innovative mix of noble elements which compose it gives it a hardness of 3.650 Vickers (HV 0.05) not reached by any other coating. This new coating is very tenacious, very resistant to high temperatures (far over the hardening limit of the HSS blades) but, it differs from other coatings because it doesn’t need to reach high temperatures to obtain the best performances. It is highly recommended for high speed cuts (HSC) with critical cutting parameters, where the performance losses due to the cutting speed increase is sensibly lower than with other traditional coating.
The friction coefficient is 0.45 and this permits to use the circular saws both when cutting without or with low cooling or mist lubrication or flood coolant.
Suitable for cutting high alloyed steels up to 1000 N/mm², stainless steel and all material developing a high thermal energy.
Used Cromar Swarf Conveyor for CNC Machines, 2022, s/n 40080, Overall dimensions 3,000mm x 590mm x 1,270mm high, Drop to floor 1,000mm, Tray opening 1,600mm long x 310mm wide, 100mm deep, From Mazak VCN430A. All dimensions are estimates, any essentia...
SIMASV
06962
VARIABLE ANGLE
Motor power Hp 4
Strokes per minute n.60
Tank capacity Lt 40
Table dimensions mm 790x950
Blade lenght mm 220
Approx. weight Kg 960
Cutting capacity R 42 kg/mm:
-angles from 30 to 60 degrees mm 3,5
-angles from 60 to 140 de...
Main bodies for all SVF series flexible vices. These bodies include precision location underneath with counterbored mounting holes and are manufactured from tool steel treated to HRC 55 and fully ground. They have an integral t-slot and serrated top ...
