The Kitagawa BR series is a large bore three jaw chuck also available with an Adaptor Plate . When coupled with T-nuts Plus a T.I.R of 0.01mm or less can be maintained to reduce setup times. The Chucks are supplied with a blank drawnut. Set of Soft Jaws and a set of standard T-nuts as standard.
High Precision, Ultra-large Through-hole High-speed Power Chuck Chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, Gripping force and bore size when compared to conventional chucks. Easy to upgrade from existing chucks, Fully interchangeable with the Kitagawa B-200 and BB-200 series chucks. The only requirement is a new threaded drawtnut. The BR Series uses the same hydraulic cylinder. if changing size for size, allowing you to implement the best performance at the lowest cost
also available without a adaptor platehttps://www.1mta.com/product/br-series-with-adaptor-plate/BR Series Chuckhttps://kitagawa.global/en/products/power-chucks/open-centre/br-high-accuracy-standard.html
ANSELMI
10098
Height of centers mm 180
Distance between centers mm 1500
Max turning diameter mm 390
Gap width mm 200
Bed width mm 320
Spindle bore mm 50
Spindle nose CAM-LOCK 6''
Quill tailstock Morse n.4
Spindle speed n.12 / rpm 37-1800
Motor HP 5.5...
ITAMA
08214
CAPACITY:
Turning diameter over the bed mm 465
Swing diameter on the cross carriage mm 290
Turning diameter in the gap mm 700
Distance between centers mm 1500
SPINDLE:
Spindle bore mm 80
Spindle taper D1-8
Spindle cone MT-5
Spindle speed ...
