Home > Metal Cutting > Milling Go Back
REQUEST PRICE

BORING FRORIEP M.M. 160

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • Froriep

    Model:

  • BORING FRORIEP M.M. 160

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
FRORIEP 06524 Spindle diameter mm 160 Column longitudinal travel X axis mm 16.000 Vertical headstock travel Y axis mm 4000/ 4200 Spindle travel axis Z mm 1500 Ram travel W axis mm 1400 Spindle taper ISO 50 Ram section mm 540x530 Spindle power kw 52 Total power input Kw 110 cca Max. spindle speed Rpm 1400/ 1600 Min. spindle speed Rpm 6 Max column travel speed m/min 6 Max vertical headstock travel speed m/min 6 Max Ram travel speed m/min 6 Machine weight ca. Ton 130/ 140 EQUIPPED WITH: -Hydraulic tool clamping -Hydraulic axis clamping normally closed -Mechanical motor brakes clamping norm. closed -Forced lubrication system X, Y (oil) -Network card for transmission of working programs from external PC MECHANICAL WORKING RANGE CARRIED OUT WITH MACHINE: -Ground no. 2 beds mm10.0000x2400- 3 guideways -Ground column from mm 6000x2500x2500 -New steel Ram headstock -New Ram mm 540x580 4 Roller guideways -No. 1 new ball-screw diameter mm 100 - vertical length mm 4200 -No. 2 new ball-screw diameter mm 60 on longitudinal head (no. 1 for spindle feedrate -and no.1 for RAM feedrate) -New gear change (to determine speed) -NewSpindle diameter 160 mm -New tool clamping system on spindle -Double pinion carriage -New roller bearings and ball bearings -New spindle bearings -New hydraulic system -New oil and coolant tank -New steel covers longitudinal and vertical (length mm16.000 + 16.000) -New control cabin (to be determined according to the needs) UPON CUSTOMER REQUIREMENT: APPLICATION FOR CNC SIEMENS 840 D / HEIDENHAIN iTNC 530 WITH THE FOLLOWING: -Functional final electric diagram -Logic-software machine and CNC parameters (CD) -Technical Documentation: -functional electric diagram format A3/file -CD containing diagrams and PLC program -list of auxiliary functions / file -set of manuals, depending on the chosen CNC in electronic format Electrical equipment: -Electrical cabinet with modules as required by mm 2000x800x600 + no. 2 spare modules -Kelvin Kun 15 conditioner good enough for the purpose -General switch 3-phase with breaker 250 amp. with door lock and minimum coil speed -Central unit CNC (SIEMENS 840D, HEIDENHAIN) -Digital drives for axis motors of the primary brand -Digital drive spindle motor of primary brand -Stable power supply 24 Vcc 20 Amp -Single-phase transformers from 110-220 V for auxiliary circuits and service cables -Flashers 3-phase with limit switches for signal of voltage presence -Limit switch for control door opening -Breakers, contactors for motors in a.c. -Circuit breakers for auxiliary circuits -Lamps for internal lighting cabinet -Terminal cables support for connection between machine and equipment -Preparation for compartment to receive any additional drives for accessories such as tables and head (max 2) Metallic cabinet with console where can be located: -Colour screen with keyboard -Machine control panel -Emergency button -Buttons and switches for general controls and controls for working in manual mode -Potentiometers for speed adjusting (as required) -Connector for connection the remote-control panel -Push-button on the head tool clamping and unclamping -Brushless motors for axes X, Y, Z, Z1 SIEMENS (with suitable shape and dimension) -Spindle motor-SIEMENS (suitable with machine and its power) -Push-button remote Siemens BHG or Heidenhain HR410 MACHINE REVAMPING
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      CONVENTIONAL LATHE
      Description:
      SUPERASSO 06035 Height of center mm.155 Max diameter swing over bed mm.310 Max diameter swing over cross carriage mm.180 Max diameter swing over gap mm.360 Distance between center mm.800 Spindle bore mm.40 Spindle nose CAMLOCK Spindle speed N°12, Rp...

      More Info

    • Manufacturer:
      ANAYAK
      Model:
      Correa/Anayak - HVM80 (F623)
      Description:
      {"Brand": "Correa/Anayak", "Machine no": "F623", "Type": "HVM80", "CNC Brand": "Heidenhain", "CNC Type": "Itnc 530", "Year of make": "2014", "Table length": "8.000 mm", "Table width": "2.500 mm", "X": "8.000 mm", "Y": "1.500 mm", "Z": "2.500 mm", "to...

      More Info

    • Manufacturer:
      Model:
      Current range A 30:300
      Description:
      CEA 07352 Max power KVA 13 Power factor cos 0,97 Secondary no load voltage V 17:41 Current at 100% A 150 Current at 60% A 200 Max rated current at 30% A 300 Adjusting positions n.12 Spot time sec 0,4:4,5 Max wire speed m/min 25 Wire diameter mm 0.6-0...

      More Info

    • Manufacturer:
      Sajo
      Model:
      Sajo DM 400 Heidenhain TNC 131
      Description:
      {"Stock number": "060473", "Serial number": "81177", "Longd. travel": "1600 mm", "Crosstravel": "500 mm", "Vertical travel": "610 mm", "Table": "2100x600 mm", "Spindle tapers": "ISO 50", "Spindle speed vertical": "20-1500 rpm", "Spindle speed horizon...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User