Hybrid drive system incorporates AC servo motor driven bi-directional, highefficiency pumps providing high speed ram movement and super accurate ramrepeatability. This advanced design offers quick setup, high-speed operation,and increased throughput.CNC controlled hydraulic cylinders located in lower beam eliminate toolshimming due to ram deflection.The Windows XPe embedded, touch screen control provides for transfer of toolsetup data, bend sequences, and 3D simulation between control and networkserver.Super accurate, high speed 5-axis backgauge reduces positioning time andeasily handles staging of complex parts.Optional Dr. ABE Bend off-line programming software further increases the highproductivity offered by the HDS 2204NT press brakeHDS 2204NT is an 243 ton, down acting, electric/hydraulic press brake with abed length of 14 feet. There are 148.0" between the frames, with an openheight of 20.47". The maximum travel distance of the ram is 9.84", and themaximum bend length that can be formed is 168.5". The ram repeatability is0.00004", while the backgauge can travel 27.55".The HDS 2204NT has an AMNC-PC control, which is used to control the ram,backgauge and other appropriate functions. There are four methods of enteringdata into the AMNC-PC control, 2D GRAPHICS mode, ANGLE Mode, DEPTH Mode and 3DMode Dr.ABE_Bend, Amada's offline simulation and programming software forpress brakes allow for the generation of programs and set-up data external tothe press brake. This translates into less time setting up the press brake andmore time running production.The hybrid drive system incorporated in the HDS 2204NT press brake offers theuser multiple benefits including: Super accurate ram repeatability - 0.00004"High speed ram movementLow power consumptionLess oil required and less frequent oil changesVery low noiseSystem SpecificationsPress BrakeMaximum Tonnage:243 U.S. tonsBend Length: 168.5 inchesMaximum Stroke Length: 9.84 inchesOpen Height: 20.47 inchesThroat Depth: 16.3 inchesDistance Between Housings: 148.0 inchesRam Repeatability: 0.00004 inchesApproach Speed: 7.87 inches per secondBending Speed: 0.78 inches per second (Max) programmableReturn Speed: 7.87 inches per secondOverall Machine Dimensions:188" (L) x 126.57" (H) x 72" (W)(224.8" (L) w/control to far left)(97.05" (W) w/control in forward position)Hydraulic Oil Capacity: 33.4 gallonsMachine Weight: 57,000 lb. Approx.Motor HP:7.5 x 2 (Main hyd. pump motors)5.5 (Crowning hyd. pump motor)Power Requirements 99 Amps at 200 VoltsBackgaugeRepeatabilityL Axis 0.0008 inchesMovement RangeL Axis 27.55 inchesY Axis 142.04 inchesZ Axis 9.8 inchesFeed SpeedL Axis 1,180 inches per minuteY Axis 2,362 inches per minuteX Axis 393 inches per minuteMinimum Command UnitRam 0.0001 inchBackgauge 0.001 inchCNC Controls, Model: Amada AMNC-PCEight Axes of Control:D1 & D2 - Ram depth( 0.098" ram tilt)L1 & L2 - Backgauge(19.68" gauge taper maximum)Z Vertical finger positionY1 & Y2 - Horiz. finger movement, side to sideCC - Ram crowningInput MethodTouch Screen:Display: 15" Color Liquid Crystal Touch Screen ProgramStorage: Limited only by network storage capacityBends per Program: 99Die Library: 300Punch Library: 300 .
ADRIATICA INDUSTRIALE
09258
MOD. APK 61
Shaft diameter mm 60
Roller diameter mm 177
Speed m/min 6,4
Working voltage V 380-415
Frequency Hz 50
Engine kW 4
Machine dimensions (wxlxh) mm 950x1400x1450
Weight Kg 970
EQUIPPED WITH:
-Three standard rollers...
FAMUP
09649
CNC SELCA S4045PD
Dimensions mm 800x375
T-slots 3
T-slots width mm 14
T-slots distance mm 125
Max load Kg 250
STROKES:
Longitudinal X axis mm 600
Cross Y axis mm 400
Vertical Z axis mm 570
SPINDLE:
Spindle speed rpm 50:10.000
Motor power ...
One piece 30° slant bed with box guides
Large swing diameter 600mm
Z-axis travel 610mm (S26/60) or 1100mm (S26/110)
10” Power chuck
High thrust force 1441 Nm
High rapid feed 18/24 m/min (X/Z)
Available with C-axis & BMT – 65 Live tooling One pie...
PEDRAZZOLI
PGT.OLE.OOO4
TECHNICAL CHARACTERISTICS
* Max sweep capacity with material resilience R=40 Kg/mm2 mm.80x5
* min. sweep radius internal mm.45
* max. sweep radius in the centre of the tube mm.400
* Max sweep angle 185.
* Engine power Kw 11.5
...
– Variable speeds – Coolant equipment – Rear guard over the entire length of the machine – Square tool post – Threading Clock – Fixed centre and reduction sleeve – Leveling feeds – Protection of...
