Home > Metal Cutting > Machining Centres Go Back
REQUEST PRICE

023155 - DMG ULTRASONIC

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • Ultra

    Model:

  • 023155 - DMG ULTRASONIC

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Number of axis total: 5.
Circulary table diameter: 190 mm.
Table load max.: 10 kg.
Longitudinal travel (X-axis): 120 mm.
Transversal travel (y-axis): 120 mm.
Vertical travel (z axis): 200 mm.
Swivel angle (a-axis): -10 / +120 °.
C axis: 360 °.
Table speed: 150 t/min.
Tool magazine number of tool places: 60.
Tool diameter max.: 30 mm.
Tool lenght: 130 mm.
Average chip-to-chip time: 15 s.
Spindle nose: HSK: 32.
from: 0 t/min.
up to: 40000 t/min.
Feed range: 10000 mm/min.
Rapid traverse:: 10 m/min.
Air connect: 6 bar.
Voltage 50 Hz 3x: 400 Volt.
Total power required: 25 kW.
Machine's weight about: 1800 kg.
Length: 2400 mm.
Width: 1600 mm.
Height: 1900 mm.
Zero-point clamping system: EROWA.
Coolant through spindle (cts): 40 bar.
Type: PH2/120.
Laser tool measurement: BLUM.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Siemens
      Model:
      Siemens Siemens C79040-A92-268-4-87, part of the set-
      Description:

      More Info

    • Manufacturer:
      TOS
      Model:
      Tos SUI 80x4000 RP
      Description:
      {"Stock number": "010801", "Serial number": "580400900020", "Swing over bed": "800mm", "Swing over crosslide": "520mm", "Spindlebore": "71mm", "Spindlespeed": "4,5-1800rpm", "Spindlenose ": "CSN 201011 B8", "Workpiece between centers": "1600kg", "Tap...

      More Info

    • France
      Manufacturer:
      Haas
      Model:
      Vertical Center Haas VF3
      Description:
      vertical center Haas VF3 year 2002 spindle speed 10000RPM

      More Info

    • Manufacturer:
      Dimeco
      Model:
      Dimeco 1675/BV
      Description:
      {"Stock number": "180413", "Serial number": "2680/3", "Stripwidth": "300mm", "Thickness full width": "0,6-2,5mm", "No of straightening rolls": "7pcs", "No of feed rolls": "4pcs", "Rolldiameter": "60mm", "Motor": "1,1kW", "Manufacturingyear": "1992", ...

      More Info

    • Manufacturer:
      Profipress
      Model:
      Profipress 30 TON HFZ (12.058P1)
      Description:
      Capacity (Ton): 30Stroke (mm): 160Volts: 400VCycles: 50

      More Info

    • Switzerland
      Manufacturer:
      MIYANO
      Model:
      CNC LATHE MIYANO TYPE BNE-42S
      Description:
      (mfg.2001) Fanuc 18i-T – 4407h function bar-feeder IEMCA Boss 545/32 (2001)  

      More Info

    • Germany
      Manufacturer:
      PEE WEE
      Model:
      PEE WEE IV
      Description:
      Year - 1960 Thread dia - 75(mm)   Thread-length - 160(mm) Thread rolling m/c centre rolling device

      More Info

    • Model:
      CUBE mm 1000x1000x570H
      Description:
      06480 USED MACHINE

      More Info

    • Manufacturer:
      Soraluce
      Model:
      SORALUCE - FP 14000
      Description:
      X-Axis: 14000mm | Y-Axis: 2600mm | Z-Axis: 1500mm | Table Length: 14000mm | Table Width: 2000mm | Table load: 50000 | Power on spindle: 43kW | Spindle speeds: 5000Rpm | Spindle Taper: 50ISO/Bt/Mk | Feed rate X-Axis: 35000mm/min. | Feed rate Y-Axis: 3...

      More Info

    • Manufacturer:
      REIDEN
      Model:
      019445 - REIDEN FU 150 A
      Description:
      {"Table length": "1250 mm", "Table width": "350 mm", "Longitudinal travel (X-axis)": "850 mm", "Transversal travel (y axis)": "250 mm", "Vertical travel (z axis)": "470 mm", "Table load max.": "400 kg", "Spindle speeds:": "", "number (steps)": "12", ...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User