Table Data:
Capacity | S2500U
Table area | 1300x300mm
Number of “T” shaped slots | 3-16H7
Distance between “T” shaped slots | 70mm
Rotary movement of table in both direction | 45º
Automatic longitudinal | 950mm
Automatic cross | 380mm
Automatic vertical | 450mm
Available distance from spindle to overarm | 155mm
Housing of the taper spindle | ISO-40
Diameter of the main shaft nose | 88.88MM
Milling arbor diameter | 27mm
Number of speeds of the spindle | 12(50-1700) 50HZ
Longitudinal and cross feeds | 10-1208mm
Vertical feed | 5-604mm
ZBS
09892
Height of centers mm 285
Distance between centers mm 2000
Swing diameter on the bed mm 580
Swing diameter on the cross slide mm 380
Bed width mm 400
Spindle bore mm 72
Spindle speed rpm 2000
Motor power kW 7.5
Carriage stroke mm 255
Carriag...
D120 Varibore hex collets are to suit 54mm capacity collet chucks. Also known as V120, these collets have a 3.175mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles.
D120 suit the following collet ch...
Used Hydrafeed MX1B Multifeed Short Magazine Bar Feeder, 2003, s/n 4897, 1.650 metre bars, Maximum stroke 1,700mm, 3-80mm dia, overall length 2,100mm, Magazine capacity 23 x 25mm dia or equivalent. Weight 415kgs, Height range 700 to 1,500mm.
