Home > Associated Products > Tooling Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Morgan Rushworth
  • Model:
  • MORGAN RUSHWORTH HST 95 Hydraulic Steelworker with Tooling. Year 2017
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Punching:Diameter x Maximum Thickness 33mm x 20mm. Maximum Diameter x Thickness mm 57mm x 12mm. Stroke Length 80mm. Throat Depth 355mm. Largest Hole Diameter standard 57mm. Largest Hole Diameter – Optional 160mm.Shearing:Flat Bar – Width x Maximum Thickness 380mm x 20mm. Flat Bar – Maximum Width x Thickness 480mm x 15mm. Angle Flange Trim – Max 45º 120mm x 15mm.Angle Cutting:90º Cut 150mm x 15mm. 45º Mitre (True Int./Ext.) 80mm x 8mm.Section Cutting:Round/Square 50mm. Channel/Beam – (Optional) 160mm x 74mm.Notching:Material Thickness 13mm. Width – Rectangle 52mm. Depth – Rectangle 100mm. Depth – Vee 70mm. Motor Power 7.5 kW.Machine dimensions L x W x H 1920mm x 790mm x 1910mm. Approximate weight 2430 kg. Tee – (Optional):100mm x 11mm. Tube Notch (Optional): Maximum Outside Diameter 108mm.Bending (Optional):Bar Bending – Maximum Capacities 250mm x 20mm. Sheet Bending – Maximum Capacities mm 500mm x 3mm.Punching at Notch Station (Optional):Throat Depth mm 125.Maximum Capacity – Diameter x Thickness 38mm x 10mm.Features include:PUNCH STATION: Easy tool change system and swing away stripper with fast manual adjustment ensure a quick setup.ANGLE STATION: This station provides large capacity angle cutting at 90º and 45º. Angles between 45º and 90º can be achieved by first cutting at 90º and then flange trimming to the required angle in the shearing station.SECTION CUTTING STATION: The machines are fitted as standard with blades for cutting round and square bars. With extra equipment, the machines are able to cut, inthis aperture, channel, joist, T-sections and many other special profiles.NOTCHING STATION: The notching station is fitted with a table with adjustable back stops allowing repetitive positioning.SHEARING STATION: The shearing unit is fitted with a simple robust hold down which is adjustable to any thickness of material within the cutting capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45º for flat bars or to trim the flanges of angle.AUTO CROP RULED LENGTH STOP:  Standard 1m stop with automatic shearing bypassing the foot switch for production applications. Can be used on all shear stations.Available in 2m and 3m options.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      KSJ-10H Steel Soft Jaws 10 Inch
      Description:
      KSJ-10H Steel Soft Jaws 10 Inch Steel serrated soft jaws to suit a 10 Inch power chuck. Jaws are manufactured from 080M15 Steel. Good Quality of of material allows for machining with a good finish.

      More Info

    • United Kingdom
      Manufacturer:
      Eckold
      Model:
      Insulation Tape - 192069
      Description:
      Insulation Tape Electrical insulation tape in a range of fade-resistant colours. Rubber glue on PVC carrier with good elasticity and elongation properties allowing conformity to irregular surfaces. Provid...

      More Info

    • Manufacturer:
      Collet
      Model:
      D285 Varibore Hexagon Collet
      Description:
      D285 Varibore hex collets are to suit 66mm capacity collet chucks. Also known as T285, these collets have a 3.175mm range. Supplied smooth as standard we can supply with alternate finishes and in special profiles. D285 suit the following collet ch...

      More Info

    • Manufacturer:
      Mazak
      Model:
      MAZAK Quick Turn Nexus 250MS CNC Lathe with Driven Tooling & Hydrafeed Barfeed. Year 2004
      Description:
      Maximum swing  674mm. Maximum machining dia. 380mm. Bar capacity 77mm. Distance between main spindle & sub spindle 538mm. Main spindle nose A2-8. Main spindle speeds 35-4000 rpm. Sub spindle nose A2-6. Sub spindle speeds 35-6000 rpm. 12 station turr...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User