LANDONIO
NEW05471
5 AXIS
COLUMN FOUR LINEAR AXIS
ROTARY TABLE AND INDEXING HEAD
CNC HEIDENHAIN iTNC 530 M
STROKES:
Axis X (longitudinal) mm. 3.000
Axis Y (head cross) mm. 1.000
Axis Z (vertical) mm. 2.000
Axis W (upright cross) mm. 1.000
Axis C (rotary table) 360 gradi
ROTARY TABLE:
Lenght mm. 1.500
Width mm. 1.800
T-slot N.8
T-slot widht mm.22 H 8
Distance between T-slots mm. 160
Load Kg. 10.000
MOTOR AND FEEDRATE:
Axis X motor Nm 48
Axis Y motor Nm 28
Axis Z motor Nm 28
Axis W motor Nm 48
Axis C motor Nm 3600
Working speed mm/min. 10.000
Rapid speed m/min 15.000
SPINDLE:
Spindle nose (DIN 69871) ISO 50
Power spindle motor (S1) with mechanical gear change Kw 25 (S1) / Kw 29 (S6)
Automatic speed N.2
Max torque Nm 1500
Continuos variation of rotation speed at constant power rpm 300/3.000 (4.000 - 50% duty cycle)
APPROX. WEIGHT:
Kg. 35.000
EQUIPPED WITH:
-Universal head birotative ISO 50 with automatic rotation of bpth the joints (indexed) with automatica positioning every 2.30° from CNC, automatic tool clamping.
-Tool changer with rotary magazine with shuttle ring, ISO 50, 40 tools.
-Tilt tool changer for changing the horizontal and vertical
-Hydostatic support system for rotary table
-Table rotation with torque motor
-Chip conveyor, lenght 4000 mm, basement chain with inverter, micro overload, band width 200 mm, CNC management, unload right side
-External coolant with low pressure nozzles
-Adduction liquid lubricating and coolant through the spindle vertical
-Tank for coolant 600 lt
-Pump high pressure flow rate l/min 25 to 50 bars of pressure, electrical connection and operation CNC (replacing the pump 32 liters at 20 bar pressure)
-Gear change mechanical FZ
-Coolant unit for cabinet
-Coolant unit for head and change
-Coolant unit torque motor
-Automatic axis clamping
-Rigid tapping with encoder
-Handwheel remote Heidenhain HR 410
-Heidhenain CC424 for dynamic TCPM
-TCPM function CNC Heidenhain
-Network connection to CNC Ethernet RJ-45
-The machine is covered with fixed panels and access sliding doors interlocked with safety microswitch CE standards (complete enclosure steel and polycarbonate)
-User and manteinance manuals, lamp, pull studs anchored to the foundation, service keys.
-Machine color RAL 7035 GREY / BLUE RAL 5024
SASS
07295
Drilling diameter mm 120
Lenght arm mm 3500
Vertical travel mm 1430
Max angle rotation 360 degree
Spindle diameter mm 135
Spindle stroke mm 600
Spindle speed n.24 Rpm 60-2650
Head power KW 18,5
Weight kg 21000
RECONDITIONED USED MACHINE
Gripper jaws can reduce the risk of the part being torn out under high machining forces. The penetrating tips produce a very high holding force even at low clamping force.
INVEMA
08204
Drilling capacity on steel mm 40
Drilling capacity on cast iron mm 50
Max arm mm 1300
Horizontal head stroke mm 1015
Vertical arm stroke mm 600
Column diameter mm 280
Spindle quill diameter mm 68
Quill stroke mm 280
Taper CM 4
Spindle sp...
DELLAVIA
BIL.FRZ.OO45
-SCREW DIAMETER MM.140
-LIGHT BETWEEN UPRIGHTS UNDER THE RAILS MM.380
-WIDTH BETWEEN THE UPRIGHTS WITHIN THE GUIDES MM.290
-HAM STROKE MM.320
-MAXIMUM HEIGHT FROM THE PLANE TO THE MALLET MM.560
-DISTANCE FROM THE TABLE UNDER THE...
