Table Size 500mm dia. x 400mm wide. X/Y/Z travels 350mm/ 550mm/510mm. A axis (table tilt) -120 – +30 ° (0.0001 ° increment). C axis (table rotation) +/-360 degrees (0.0001° increment). Maximum Workpiece Size 500mm x 350mm. Maximum table load 300kg. T slots 5 x 18mm x 80mm pitch. Maximum cutting feedrate 565m/minute. Rapid feedrates X/Y/Z axes 60/60/56m/min. Rapids A&C Axes 18,000°/min. Min/Max Height table to spindle nose 50mm/560mm. Automatic Tool Changer 40 station. Toolchange time chip to chip 4.5 seconds. Spindle Motor Power (40% ED/Cont rating) 22/15 kW. Electrical power requirement (40% ED/Cont rating) 51.07 kVA/41.17 kVA. Spindle speeds to 12,000 rpm. No. of controlled axes (5). Maximum Tool diameter /length/weight 90mm/300mm/8kg. Maximum tool dia. with empty adjacent pockets 130mm. Tool change time (chip to chip) 4.5 seconds. Coolant tank capacity 300 Litres. Mazatrol Matrix 2 Control. Machine dimensions L x W x H 3235mm x 2400mm x 2975mm. Approximate weight 8000kg
Table Size 1321mm x 457mm. Traverses X/Y/Z 1270mm/508mm/635mm Maximum Cutting Feedrate 18m/min. Rapids 18m/minute. Min/Max Height Table to Spindle nose 102/737m. Spindle Motor Power 40Hp. Spindle Speeds to 10,000rpm. 40 Auto Tool Changer. Spindle tap...
Table Size 1372 x 635mm. Travels X/Y/Z 1016/660/635mm. Spindle Nose to Table (~ max) 749mm. Spindle Nose to Table (~ min) 114mm. T-Slot Width 16mm. T-Slot Center Distance 80mm. Number of Std T-Slots 7. Max Weight on Table (evenly distributed) 794Kg. ...
