DELTA
07690
DIASTEP
WORKING CAPACITY:
-Max grinding lenght 1300 mm
-Max grinding width with band wheel 50, 600 mm
-Max grinding width with band wheel 100, 650 mm
-Max distance spindle axis/table surface 800 mm
TABLE (AXIS X):
-Surface size 1200x500 mm
-"T" slots width (Nx3) 18 mm
-Interaxis between slots 125 mm
-Adjustable working speed with continuity 0:40 m/min
-Max longitudinal stroke 1400 mm
-Max allowable weight 1200 kg
CROSS (AXIS Y):
-Max cross stroke 550 mm
-Adjustable working speed with continuity 0:2 m/min
-Min. programmable cross increase 0.001 mm
VERTICAL (AXIS Z):
-Vertical rapid feeedrates 1,5 m/min
-Min. programmable vertical increase 0.001 mm
SPINDLE:
-Power (in S1) 7,5 kW
-Wheel size (IS0 525) 400x50x127-200x10 mm
-Wheel size (IS0 525) 400x100x127-200x10/40 mm
HYDRAULIC UNIT MOTOR (AS. TRIF.):
-Power 4 kW
MOTOR COOLANT ELECTROPUMP (AS. TRIF.):
-Power 0.18 kW
MASS:
-Approx net weight 6000 kg
STANDARD EQUIPMENT:
-Ground precision ballscrews (ISO 3) with double preloaded nut on vertical axes (Z axis) and cross (Y-axis)
- Proportional hydraulic drive for the movement of the longitudinal table (X)
- Electronic resolution with double resolution (0.001 / 0.01 mm) for manual movement of X and Y axes
Hydraulic unit (oil-free) complete with heat exchanger
-Electric external power station and control pulpit with low voltage controls. 380 V / 50 Hz power supply - three phase + neutral
- Coolant system with sheet metal tank and 0.18 kW electric pump
- Grinding wheel holder, grinding wheel. 400x50x127 - 200x10 mm, locking nut and extractor
Diamond-holder without diamond
-Carter protection
COMPLETE MACHINE OF:
- Balancing shaft
-Electropermanent table 1200x500 mm with power adjustment and automatic removal of the magnetic part of the anchored piece
-Wheel electrical balancing
-Halogen lamp
YEAR 2008
CMC
08095
ROTARY
Load 1450 l/min
Working pressure 10 Bar
Nominal power 11/15 Kw/HP
Voltage 400 V
Frequence 50 Hz
Weight Kg 475
EQUIPED WITH:
-Drier
-Tank 500 lt.
USED MACHINE
YEAR 2010
CLEARING
08591
ECCENTRIC DOUBLE COLUMN
Thrust 450 ton
Table dimensions 3100x2150 mm
Slide stroke mm 610
Slide dimensions 3100x2150 mm
Slide adjustment mm 200
Stroke per minute n.20
Thrust points n.4
Distance between tables 1650 mm
Side opening 2250 m...
