Julia coated HSS circular saw blades using a P.V.D. multi-layer coating with a thickness of 2.5 µm opaque grey coloured. The particular and innovative mix of noble elements which compose it gives it a hardness of 3.650 Vickers (HV 0.05) not reached by any other coating. This new coating is very tenacious, very resistant to high temperatures (far over the hardening limit of the HSS blades) but, it differs from other coatings because it doesn’t need to reach high temperatures to obtain the best performances. It is highly recommended for high speed cuts (HSC) with critical cutting parameters, where the performance losses due to the cutting speed increase is sensibly lower than with other traditional coating.
The friction coefficient is 0.45 and this permits to use the circular saws both when cutting without or with low cooling or mist lubrication or flood coolant.
Suitable for cutting high alloyed steels up to 1000 N/mm², stainless steel and all material developing a high thermal energy.
Kitagawa S Series hydraulic cylinders are made with high grade alloy steel.
The S series cylinders are Kitagawa's standard range of hydraulic cylinder
and are fitted as standard to a wide range of machines.
These cylinders can be bought as a...
Vacmagic gasket material available in a range of sizes and sold by the foot. The standard vacmagic pallets and bases use 0.17" diameter gasket material and the other available sizes are intended for custom pallets. This material comes in two colours:...
IMSA
10161
Drilling depth transverse movement axis V 1.000 mm
Column longitudinal movement axis X 1.650 mm
Drilling slide vertical movement axis Y 1.000 mm
Drilling slide workpiece support movement axis W 500 mm
Drilling slide vertical tilting max ax...
Table Data:
Capacity | 2500M
Table area | 1500x350mm
Number of “T” shaped slots | 5-16H7
Distance between “T” shaped slots | 60mm
Rotary movement of table in both direction | 45º
Automatic longitudinal | 1150mm
Automatic cross | 400mm
Auto...
