Hybrid drive system incorporates AC servo motor driven bi-directional, highefficiency pumps providing high speed ram movement and super accurate ramrepeatability. This advanced design offers quick setup, high-speed operation,and increased throughput.CNC controlled hydraulic cylinders located in lower beam eliminate toolshimming due to ram deflection.The Windows XPe embedded, touch screen control provides for transfer of toolsetup data, bend sequences, and 3D simulation between control and networkserver.Super accurate, high speed 5-axis backgauge reduces positioning time andeasily handles staging of complex parts.Optional Dr. ABE Bend off-line programming software further increases the highproductivity offered by the HDS 2204NT press brakeHDS 2204NT is an 243 ton, down acting, electric/hydraulic press brake with abed length of 14 feet. There are 148.0" between the frames, with an openheight of 20.47". The maximum travel distance of the ram is 9.84", and themaximum bend length that can be formed is 168.5". The ram repeatability is0.00004", while the backgauge can travel 27.55".The HDS 2204NT has an AMNC-PC control, which is used to control the ram,backgauge and other appropriate functions. There are four methods of enteringdata into the AMNC-PC control, 2D GRAPHICS mode, ANGLE Mode, DEPTH Mode and 3DMode Dr.ABE_Bend, Amada's offline simulation and programming software forpress brakes allow for the generation of programs and set-up data external tothe press brake. This translates into less time setting up the press brake andmore time running production.The hybrid drive system incorporated in the HDS 2204NT press brake offers theuser multiple benefits including: Super accurate ram repeatability - 0.00004"High speed ram movementLow power consumptionLess oil required and less frequent oil changesVery low noiseSystem SpecificationsPress BrakeMaximum Tonnage:243 U.S. tonsBend Length: 168.5 inchesMaximum Stroke Length: 9.84 inchesOpen Height: 20.47 inchesThroat Depth: 16.3 inchesDistance Between Housings: 148.0 inchesRam Repeatability: 0.00004 inchesApproach Speed: 7.87 inches per secondBending Speed: 0.78 inches per second (Max) programmableReturn Speed: 7.87 inches per secondOverall Machine Dimensions:188" (L) x 126.57" (H) x 72" (W)(224.8" (L) w/control to far left)(97.05" (W) w/control in forward position)Hydraulic Oil Capacity: 33.4 gallonsMachine Weight: 57,000 lb. Approx.Motor HP:7.5 x 2 (Main hyd. pump motors)5.5 (Crowning hyd. pump motor)Power Requirements 99 Amps at 200 VoltsBackgaugeRepeatabilityL Axis 0.0008 inchesMovement RangeL Axis 27.55 inchesY Axis 142.04 inchesZ Axis 9.8 inchesFeed SpeedL Axis 1,180 inches per minuteY Axis 2,362 inches per minuteX Axis 393 inches per minuteMinimum Command UnitRam 0.0001 inchBackgauge 0.001 inchCNC Controls, Model: Amada AMNC-PCEight Axes of Control:D1 & D2 - Ram depth( 0.098" ram tilt)L1 & L2 - Backgauge(19.68" gauge taper maximum)Z Vertical finger positionY1 & Y2 - Horiz. finger movement, side to sideCC - Ram crowningInput MethodTouch Screen:Display: 15" Color Liquid Crystal Touch Screen ProgramStorage: Limited only by network storage capacityBends per Program: 99Die Library: 300Punch Library: 300 .
Pressure total: 50 ton
Stroke: 200 mm
Daylight: 650 mm
Table surface area : 1.150 x 900 mm
Slide area: 1.150 x 900 mm
Approach speed: 660 mm / sec
Working speed: 33 - 84 mm / sec
Return speed: 660 mm / sec
Required power: 24 kW
W...
