This hydraulic C-frame press 100 ton is made in Europe. Suitable for cutting, punching and stamping or other metal working jobs. You can regulate the piston stroke with an electronic NC-controller. With this control-system it is possible to set the position of the piston stroke with an accuracy of 0.1 mm. When you need to hold the press in its lowest position under pressure, you easily adjust this holding time from 0 to 2 seconds. Our 100 ton C-frame press has two work modes: manual and semi-automatic. Its table is equipped with T-grooves and a central hole: waste from punching operations can fall freely through this hole into the collection tray. Adjusting the speed and pressing force can be done by means of the hydraulic adjustment valves. Furthermore, the press is also equipped with a manometer. We have many Profi Press C-frame Presses in our product program. Feel free to contact us for more information about this Hydraulic C-frame Press 100 ton capacity. Or have a closer look at all the different models at our website.
PRELIMINARY SPECIFICATIONS800 TON BLISS STRAIGHT SIDE PRESSMODEL SE2-800-84-48YEAR 1960800 TON CAPACITY18" STROKE28" SHUT HEIGHT (S.D.A.U.)8" SLIDE ADJUSTMENT84" LR X 48" FB BED AREA26" WIDE X 43" H WINDOWS18 SPM (FIXED)15-25 SPM (VARIES WITH SHEAVE ...
BEST hydraulic centric vices are a no compromise solution to repeating and long running 4th and 5th axis workholding. BEST have focused on the production of high accuracy, high rigidity vices. These vices are suitable for both internal and external c...
