Home > Metal Cutting > Machining Centres Go Back
REQUEST PRICE

022585 - DMG DMC 60 U

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • DMG

    Model:

  • 022585 - DMG DMC 60 U

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Operating time: 19467 Heures.
Number of axis total: 5.
Table length: 630 mm.
Table width: 500 mm.
Centering bore diameter: 50 mm.
Table load max.: 600 kg.
Longitudinal travel (X-axis): 600 mm.
Transversal travel (y-axis): 700 mm.
Vertical travel (z axis): 550 mm.
Tool magazine number of tool places: 60.
Tool diameter max.: 100 mm.
Diameter with free adjacent pockets: 160 mm.
Tool lenght: 350 mm.
Max. tool-weight: 10 kg.
Spindle nose SK: 40 DIN 69871.
from: 20 t/min.
up to: 12000 t/min.
Feed range: 1 - 10000 mm/min.
Voltage 50 Hz 3x: 400 Volt.
Machine's weight about: 9500 kg.
Length: 500 mm.
Width: 500 mm.
Height: 2484 mm.
Coolant through spindle (cts): 17 bar.
Pallets: number: 2.
Max. Load: 600 kg.
Spindle changed: 2016.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Model:
      022821 - UNIMAG PFA-40
      Description:
      {"Total Capacity": "120 l", "Capacity": "40 l/min", "Paper filter width": "500 mm", "Paper filter length": "90 m", "Pump motor installed power": "25 W", "Dimensions:": "", "Length": "1200 mm", "Width": "720 mm", "Height": "660 mm"}

      More Info

    • Manufacturer:
      Bosch
      Model:
      Bosch Bosch KM 1100-T
      Description:

      More Info

    • Switzerland
      Manufacturer:
      STUDER
      Model:
      WHEEL-FLANGE STUDER TYPE S40-2
      Description:
      WHEEL-FLANGE "STUDER" TYPE S40-2 Reference: 92140062 ...

      More Info

    • United States of America
      Model:
      NILSON S2 FOUR SLIDE WIRE FORMER
      Description:

      More Info

    • United Kingdom
      Manufacturer:
      XYZ
      Model:
      XYZ Turret Mill 1500 (2017)
      Description:
      Year: 2017Rated Voltage: 400VPhase: 3Full load current: 7.5AMax RPM: 3500Weight: 925KGMain motor: 2.2 kW

      More Info

    • Manufacturer:
      SCHAUBLIN
      Model:
      023100 - SCHAUBLIN 102N-80 VM
      Description:
      {"Centre height": "102 mm", "Distance between centres": "450 mm", "Swing over cross-slide": "120 mm", "Swing over bed": "200 mm", "Taper in spindle:": "", "Thread": "", "Spindle speeds:": "", "number (steps)": "8", "from": "0.020 mm/t", "up to": "0.3...

      More Info

    • Manufacturer:
      Doosan
      Model:
      CENTER DOOSAN MOD. VM 6500
      Description:
      DOOSAN 09161 BOX GUIDEWAY CNC HEIDENHAIN TNC 530 CAPACITY': Distance spindle center - column mm 722 Distance spindle nose - table surface 150-775 mm SPINDLE: Spindle rotation speed rpm 60-12000 Spindle motor power (cont./40%-25%) kW 22 / 35-46 Spindl...

      More Info

    • Model:
      Vturn 40 / 425
      Description:
      Heavy cutting lathe with spindle nose A2-11 for turning length from 1250mm to 4250mm. Bar capacity 91mm, Spindle speed 2500rpm. Single piece cast slant bed (45-degree) for minimum distance from ball screw to the tool tip Spindle bore A2-11 with hydra...

      More Info

    • Manufacturer:
      Colchester
      Model:
      Colchester Mascot 1600 Gap Bed Centre Lathe x 2000m
      Description:
      Max’ Distance Between Centres 2000mm Max’ Swing over Bed 432mm Max’ Swing over Cross slide 267mm Max’ Swing in Gap 710 mm Spindle Bore 76mm Spindle Nose No.8 D1 Camlock Spindle Speeds 20 - 1600rpm Supplied with: QCTP Chuck Keys Whilst every e...

      More Info

    • United Kingdom
      Model:
      ITEM 82 - 1235 Bearing Cap (H64)
      Description:
      To purchase this item nowCLICK HERE...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User