Number of axis total: 7. Number of spindles: 2. Max. turning diameter: 20 mm. Maximum turning length: 195 mm. Max. drilling diameter: 7 mm. Max. threading diameter: 6 M. Inner taper type: ER16. from: 500 t/min. up to: 8000 t/min. Spindle power: 2.2 / 3.7 kW. C axis (spindle,resolution): 15 °. Max. tapping length: 75 mm. Thread drill diameter: 3 M. Back machining workpiece length max.: 85 mm. Turning tools: 6 pce. Drilling tools: 4 pce. Spindle speeds (turning tools): 8000 t/min. Power of driven tools: 0.9 kW. number of tools: 4. Rapid traverse:: 20 m/min. Cutting speed: 10000 mm/min. Voltage 50 Hz 3x: 400 Volt. Spindle motor: 2.2 / 3.7 kW. Power of back spindle: 0.5 kW. Air connect: 5 bar. Total power required: 6 kVA. Machine's weight about: 2000 kg. Length: 2207 mm. Width: 1080 mm. Height: 1700 mm. Manufacturer: Müller. Type: CL2. year of manufacture: 2018. Length of bars max.: 3200 mm. Bar diameter: 3 - 20 mm. Maximum pressure: 70 bar. Coolant system: 145 l. Fire extinguishing system: SIEMENS.
T-Nuts to suit B200, some BB200, BR & BRT series chucks
Used for the mounting of jaws onto the base jaws on a power chuck.
These are supplied with the bolts required.
Keeping spare t-nuts can result in reducing setup times.
Herbert 2 spindle drill bank, 8 speed, 160-1450 rpm, rise/fall table, both drills with auto downfeed, 3 morse taper very good condition. Ex maintenance shop. Little use
HECKERT
New03431
HORIZONTAL MACHINE CENTER
TECHNICAL CHARACTERISTIC:
6000 RPM
Rapid speed: 6000 mm/min
Capacity table: 1200 Kg
Acceleration: G. 0,15
Table size: 630 x 630 mm.
Diameter max of the cube: 1000 mm.
Axis X: mm. 900
Axis Y: mm. 740 (Y min....
7" Touch screen HMI | Electronic section height detector | Pneumatic pop up centre support | Automatic tilting of the saw heads 90° - 22.5° | Intermediate angles set on large sector plate | Digital setting of the cutting length +/- 0.1° | USB data...
