Home > Metal Cutting > Lathes (CNC and Manual) Go Back
REQUEST PRICE

019656 - FEHLMANN PICOMAX 80 CNC 2/3

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • N/A

    Model:

  • 019656 - FEHLMANN PICOMAX 80 CNC 2/3

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Number of axis total: 5.
Spindle nose:: SF 32.
Drill capacity in steel: 30 mm.
Threat cutting in steel M: 24.
Milling capacity: 100 cm3/min.
from: 50 t/min.
up to: 9200 t/min.
Table length: 1230 mm.
Table width: 410 mm.
Number of T-channels: 7.
T-channel width: 12H8 mm.
Distance of the T-slots: 50 mm.
Table load max.: 250 kg.
Height of table above floor: 1010 mm.
Min. distance from table to spindle: 0 mm.
Max. distance from table to spindle: 620 mm.
Depth of throat: 370 mm.
X axis: 1 - 9000 mm/min.
Y axis: 1 - 9000 mm/min.
Spindle stroke (controlled): 170 mm.
Z axis (Spindle stroke manual): 180 mm.
W-axis (machine head travel): 495 mm.
Z axis: 1 - 4000 mm/min.
W axis: 1 - 4500 mm/min.
Rapid traverse X: 9 m/min.
Rapid traverse Y: 9 m/min.
Rapid traverse Z: 4 m/min.
Voltage 50 Hz 3x: 380 Volt.
Power: 16 kW.
Machine's weight about: 3200 kg.
Length: 2500 mm.
Width: 2500 mm.
Height: 2450 mm.
3-jaw chuck diameter: 160 mm.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Kasto
      Model:
      KASTO - KASTOtec A4
      Description:
      Cutting 90°: 430 | Cutting flat 90°: 430 x 430mm | Feed single stroke: 0 - 600mm | Feed multiple stroke: 0 - 9999mm | Min. cutting length: 35mm | Cutting speed Vario: 12 - 120 | Circle blade size: 6830 x 41 x 1.3mm | Power: 7.5kW | Length: 4800mm |...

      More Info

    • United Kingdom
      Manufacturer:
      FACCIN
      Model:
      NEW 4-roll Direct Electric-Drive Plate Roll
      Description:
      The NEW 4HEP-E is a 4-roll, direct electric-drive plate roll which provides unmatched efficiency, productivity, and ergonomics. Many features and FACCIN innovations set the 4HEP-E apart from every other plate roll on the market.  Produc...

      More Info

    • United Kingdom
      Manufacturer:
      Adcock and Shipley
      Model:
      Adcock and Shipley 1 EAJ
      Description:
      Description not available

      More Info

    • Manufacturer:
      MACH
      Model:
      CENTER EUMACH LBM 2000-
      Description:
      EUMACH 08768 BSE 2200 CNC FIDIA nC19 STROKES: Axis X stroke mm 2200 Axis Y stroke mm 1750 Axis Z stroke mm 750 Distance between columns mm 1750 TABLE: Table dimensions mm 2100x1600 Longitudinal T-slots mm 9x18, passo mm 180 Distance min-max table/spi...

      More Info

    • Manufacturer:
      Colchester
      Model:
      Colchester Triumph 2000 x 50” Gap Bed Centre Lathe
      Description:
      Overhauled MachineHeight of Centres 190mmMax’ Distance Between Centres 1250mmMax’ Swing over Bed 390mmMax’ Swing over Cross Slide 240mmMax’ Swing in Gap 580mmSpindle Bore 54mmSpindle Nose D16 CamlockSpindle Taper in Bush No.4 MorseSpindle Spe...

      More Info

    • Manufacturer:
      JENNY
      Model:
      Jenny E15
      Description:
      {"Stock number": "170220", "Serial number": "33967", "Capacity": "15 ton", "Hydraulic preassure": "110 at\u00f6", "Stroke": "500 mm", "Table": "550x350 mm", "Radius": "220 mm", "Daylight": "600 mm", "Motors in total": "6,7 kW", "Length": "950 mm", "W...

      More Info

    • Manufacturer:
      Mori Seiki
      Model:
      MORI SEIKI SL 2500 Y LATHE
      Description:
      MORI SEIKI 10213 WITH Y AXIS Turning diameter 755 mm Machinable diameter 390mm Machinable length 655 mm Turret 12 motorized stations Y-axis + / - 60 mm C-axis Spindle A2-8 Kitagawa B-210 250 mm Rpm 3,500 Spindle motor 18.5 Kw Motorized tool motors 5....

      More Info

    • United Kingdom
      Model:
      ITEM 61 - 1166 Hex Jam Nut (ST349)
      Description:
      To purchase this item nowCLICK HERE...

      More Info

    • Manufacturer:
      MACH
      Model:
      Refurbished 2011 Mecal MC309 Nike Machining Center
      Description:
      MU-DPM version with automatic magazine & clamps positioned by head | Main spindle does all work with full use of the magazine | Open ends to allow machining of longer pieces | Full CAM-3d software | 3490mm working length | Option for mist extraction ...

      More Info

    • Manufacturer:
      Linde
      Model:
      TRUCK LIFT LINDE E15
      Description:
      LINDE 08080 ELECTRIC Load Kg 1.500 USED MACHINE

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User