Magnum HL varying tooth height and set M-71 blade for metal cutting band saw
With its special alloying technology, the Amada MAGNUM HL bandsaw blade achieves HRC70 tooth hardness. It maintains positive cutting action and outlasts other blades in production cutting of large-diameter, work hardening steels and nickel-base super alloys with tensile strength of up to 164,000 psi.
Suitable for Monel, K-Monel, Inconel 718, Hastelloy, Incalloy 800, Astroloy Monel 400, Titanium
15 degree positive rake angle
Hardness of HRC70
High-Low variable tooth height
Patented M-71 high speed edge
ADVANTAGES
High heat resistance
High wear resistance
Higher tooth hardness than M-42 bi-metal blade
Reduced cutting resistance
BENEFITS
Faster cutting on difficult to cut material
Faster cutting on large diameter material
Increased accuracy
Long life on difficult to cut material
The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products.
V: Variable Positive Rake
World leading performance guaranteed | Best choice for general applications with medium yield | Rake angle: positive (hook tooth) | Rake angle: 0° (standard tooth) | Band width 6 x 0.65 - 67 x 1.6mm | M42 tooth edge with customised rake angle | Cons...
