Home > Metal Cutting > Milling Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Froriep
  • Model:
  • BORING FRORIEP M.M. 160
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

FRORIEP 06524 Spindle diameter mm 160 Column longitudinal travel X axis mm 16.000 Vertical headstock travel Y axis mm 4000/ 4200 Spindle travel axis Z mm 1500 Ram travel W axis mm 1400 Spindle taper ISO 50 Ram section mm 540x530 Spindle power kw 52 Total power input Kw 110 cca Max. spindle speed Rpm 1400/ 1600 Min. spindle speed Rpm 6 Max column travel speed m/min 6 Max vertical headstock travel speed m/min 6 Max Ram travel speed m/min 6 Machine weight ca. Ton 130/ 140 EQUIPPED WITH: -Hydraulic tool clamping -Hydraulic axis clamping normally closed -Mechanical motor brakes clamping norm. closed -Forced lubrication system X, Y (oil) -Network card for transmission of working programs from external PC MECHANICAL WORKING RANGE CARRIED OUT WITH MACHINE: -Ground no. 2 beds mm10.0000x2400- 3 guideways -Ground column from mm 6000x2500x2500 -New steel Ram headstock -New Ram mm 540x580 4 Roller guideways -No. 1 new ball-screw diameter mm 100 - vertical length mm 4200 -No. 2 new ball-screw diameter mm 60 on longitudinal head (no. 1 for spindle feedrate -and no.1 for RAM feedrate) -New gear change (to determine speed) -NewSpindle diameter 160 mm -New tool clamping system on spindle -Double pinion carriage -New roller bearings and ball bearings -New spindle bearings -New hydraulic system -New oil and coolant tank -New steel covers longitudinal and vertical (length mm16.000 + 16.000) -New control cabin (to be determined according to the needs) UPON CUSTOMER REQUIREMENT: APPLICATION FOR CNC SIEMENS 840 D / HEIDENHAIN iTNC 530 WITH THE FOLLOWING: -Functional final electric diagram -Logic-software machine and CNC parameters (CD) -Technical Documentation: -functional electric diagram format A3/file -CD containing diagrams and PLC program -list of auxiliary functions / file -set of manuals, depending on the chosen CNC in electronic format Electrical equipment: -Electrical cabinet with modules as required by mm 2000x800x600 + no. 2 spare modules -Kelvin Kun 15 conditioner good enough for the purpose -General switch 3-phase with breaker 250 amp. with door lock and minimum coil speed -Central unit CNC (SIEMENS 840D, HEIDENHAIN) -Digital drives for axis motors of the primary brand -Digital drive spindle motor of primary brand -Stable power supply 24 Vcc 20 Amp -Single-phase transformers from 110-220 V for auxiliary circuits and service cables -Flashers 3-phase with limit switches for signal of voltage presence -Limit switch for control door opening -Breakers, contactors for motors in a.c. -Circuit breakers for auxiliary circuits -Lamps for internal lighting cabinet -Terminal cables support for connection between machine and equipment -Preparation for compartment to receive any additional drives for accessories such as tables and head (max 2) Metallic cabinet with console where can be located: -Colour screen with keyboard -Machine control panel -Emergency button -Buttons and switches for general controls and controls for working in manual mode -Potentiometers for speed adjusting (as required) -Connector for connection the remote-control panel -Push-button on the head tool clamping and unclamping -Brushless motors for axes X, Y, Z, Z1 SIEMENS (with suitable shape and dimension) -Spindle motor-SIEMENS (suitable with machine and its power) -Push-button remote Siemens BHG or Heidenhain HR410 MACHINE REVAMPING
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Bergonzi
      Model:
      DRILLING BERGONZI MOD. TR40/1250
      Description:
      BERGONZI 09215 Max drilling on cast iron 50 mm Max drilling on steel 40 mm Thread capacity 40 mm Fine thread capacity 50 mm Arm mm 1250 Arm stroke 600 mm Head stroke 1000 mm Spindle rpm 40-1400 50Hz Spindle diameter 75 mm Morse taper 4 Useful base di...

      More Info

    • Manufacturer:
      GRINDING
      Model:
      GRINDING INTERNAL BRYANT
      Description:
      BRYANT RTF.INT.OO74 DIAM. GRINDING WHEEL: mm 60 DISTANCE BETWEEN CENTRE: mm 500 HEIGHT OF CENTRE: mm 350 USED MACHINE

      More Info

    • Manufacturer:
      Seiki
      Model:
      CENTRE MITSUI SEIKI MOD. VR3A
      Description:
      MITSUI SEIKI New04773 CNC GE FANUC OM -AXIS X MM.710 -AXIS Y MM.430 -AXIS Z MM.430 -TABLE SIZE MM.480X890 -TOOL CHANGE N. 20 POSITIONS USED MACHINE

      More Info

    • Manufacturer:
      Universal
      Model:
      CHESTER MODEL T UNIVERSAL MILLING MACHINE
      Description:
      240V Mains Operated. Ground Column Slide ways. Variable Speed Horizontal + Vertical. 3 Axis Digital Readout.

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User