• Feeders
    United Kingdom
    Description:
    The ks manual linear feeder with tilting stops (2, 4 or 6m long) is a versatile, flexible and budget friendly linear feeder solution. the more sophisticatedcnc controlled linear rail feeder is the ideal device for structural steel and engineering workshops. both solutions are cap...
  • Feeders
    United Kingdom
    Make/Model:
    Description:
    Another reason for chosing our hot air generators is for the automatic feeders, indicated for many kinds of solid fuels like wood-pellets, saw-dust, wood-chips, brikets, olive stones, ....the complete range of bio4heating automatic feeders can be differenciated by an easy utiliza...
  • Feeders
    United Kingdom
    Description:
    For all manufacturing divisions of structural steel engineering workshops.the cnc controlled linear rail is the ideal device for cost effective punching and notching of flat steel, angles, channels, 't' and 'i' beams.available with a standard length of 4.00m - giving an operating...
  • Feeders
    United Kingdom
    Description:
    The ks model linear rail is a manual feeding system with tilting stops.to start all the stops are pushed in, the material is then fed into the machine. when it passes the stop - the stop will tilt and the material is then pushed against this stop, so it reaches the correct positi...
  • Feeders
    United Kingdom
    Description:
    The ks manual linear feeder with tilting stops (2, 4 or 6m long) is a versatile, flexible and budget friendly linear feeder solution. the more sophisticatedcnc controlled linear rail feeder is the ideal device for structural steel and engineering workshops. both solutions are cap...
  • Feeders
    United Kingdom
    Description:
    Manufacturer: wadkinmodel: ber 3 spindle mouldercapacity:: spindle diameter 30mm (1 ) rise / fall of spindle 150mm (6)table size:: 910 x 815 mm (36" x 32")equipment:: maggi steff 2034 power feed unitspeeds:: 2,800, 4,500, 5,600 & 8,000 rpmpower:: three...
  • Feeders
    United States of America
    Make/Model:
    Description:
    Preliminary specificationschs (coil handling systems) press mount servo feedermodel drf-312year 2003.156" x 12" width material capacityequipped withfloor standing control panelair operated pilot releasejog forward / reverseuniop hmi interfaceyaskawa servo driveexcelerator servo ...
  • Feeders
    United States of America
    Make/Model:
    Description:
    Preliminary specificationscoe servo feedermodel: sprf-m12 pluss/n: 16356year 1997.090" material capacity @ 12" width capacitycoe servo feeder control consolereverse / forward this feeder is no longer mounted to the press as shown in pictureavailable for inspection, available imme...
  • Feeders
    United States of America
    Make/Model:
    Description:
    Preliminary specificationssesco coil feed line60,000lb x 36" wide x .090" thick model 53-262year 1984sesco coil handling line consisting of:sesco coil cars/n: 21127pull off type centering reel with power threading drive & drag brakes/n: 21228sesco coil hold down rolls and peelers...
  • Feeders
    United States of America
    Description:
    Strip width:
    609.60mm
    strip thickness:
    2.36mm
  • Feeders
    United States of America
    Description:
    Maximum stock width:
    508.00mm
    maximum stock thickness:
    6.35mm (@ 177.80mm width)
    feed length range:
    8.00mm - 914.40mm
    feed rate (variable):
    up to60.96 m/min
    feed speed (variable):
    up to 700 spm
  • Feeders
    United States of America
    Description:
    Max. drawing depth:
    40.64mm
    max. material width:
    114.30mm
    max. feed length:
    81.28mm
  • Feeders
    United States of America
    Description:
    General specifications fro manufacturer's brochure: consists of three (3) guide tubes with internal diameters of: .670" for 1/2" to 5/8" diameter barstock .551" for 1/4" to 1/2" diameter barstock .315" for 1/16" to 1/4" diameter barstock equipped with: eac...
  • Feeders
    United States of America
    Description:
    General specifications for lns type hys 6.32 hs-4.8 barfeed consisting of: a three-piece aluminum profile barrel assembly containing 6 steel guide tubes aranged in a concentric circle with manual indexing ring at the rear, and an automatics centering system at the front of ...
  • Feeders
    United States of America
    Description:
    Specifications: consists of three (3) guide tubes with internal diameters of: .866" for 1/2" to 13/16" diameter barstock .551" for 1/4" to 1/2" diameter barstock .315" for 1/16" to 1/4" diameter barstock equipped with: each guide tube contains its own pu...