=
X Product has been added successfully. See your cart

Description: Technical specifications Force [tn]: 300 Motor Power [kW]: 7,5 Throat depth [mm]: 425 Working speed [mm/sec]: 2,1 Approaching speed [mm/sec]: 10 Return speed [mm/sec]: 16 Maximum pressure [bar]

Date of Manufacture: NEW

Make/Model:
CF-150 C-Frame Press

Description: Technical specifications Force [tn]: 150 Motor power [kW]: 7,5 Throat depth [mm]: 400 Working speed [mm/sec]: 5,1 Approaching speed [mm/sec]: 69 Return speed [mm/sec]: 100,5 Maximum pressure [b

Date of Manufacture: NEW

Make/Model:
KAISER V40 WH 40T

Description: KAISER V40 WH 40T HIGH SPEED DOUBLE SIDED PRESS

Description: , XPERT 250, Type - EHP, Downstroking, Maximum Tonnage 275, Length (in.) 159.9", Between Housing - 108 - 200, Stroke Length - 10.4, Open Heights (in.) - 21.6, Throat Depth (

Description: Durable, cast-iron, two-stage design offers extended pump life for years , of trouble-free service., EQUIPPED WITH:, 100% Continuous Duty For Tough Applications, Automatic Start/Stop Contr

Description: , EQUIPPED WITH:, Tank - Air Filter, Pressure Switch, Temperature Switch, Low Oil Level Switch, Perfex Model 5B-10 Coolant System, With a 5HP - 230/460 Fan Motor, Model A8 with

Description: STANDARD EQUIPMENT:, 20 HP Motor, Pump & Filter Modulationg Inlet Valve, 800 Gal Tanks (1 300 & 1 500) Magnetic Motor Starter, Positive Lubrication Fluid Pump Spin on Fluid Filter, Standar

Description: , EQUIPPED WITH:, Quartech Digital Control, Headstock w/Center, Tailstock w/Center, Adjustable Straightening Stroke w/Joystick, Rolling Work Supports w/Roller Type Work Rests, Anv

Description: , EQUIPPED WITH:, Adjustable Centers, 2 Brake Rests, SPECIFICATIONS:, Stroke: 12", Ram Speed (Down Per Minute @ 1200 RPM): 53", Ram Speed (Up Per Minute @ 1200 RPM): 83", Opera

Description:

Description: , EQUIPPED WITH:, EXTREMELY HIGH QUAILITY PURIFICATION, Removes metallic fines and other solids down to one micron., Separates tramp fluids down to one quarter of one percent (.0025).,

Description: , EQUIPPED WITH:, Reduced cleanout frequency due to its 750 cubic inch holding capacity., Removes both ferous and non-ferous contaminants., Accommodates water-based or oil-based liquids.

Description: PRELIMINARY SPECIFICATIONS, ROUSSELLE PRESS, MODEL 4SS56, 40 TON CAPACITY, 3" STROKE, 13.5" SHUT HEIGHT, 3" ADJUSTMENT, 33" FROM FLOOR TO TOP OF BED, 56" X 22" BED AREA, 56"

Description: PRELIMINARY SPECIFICATIONS, HELLER SUTHERLAND SINGLE POINT GAP FRAME PRESS, MODEL MARK 176, S/N: HS-198, 176 TON CAPACITY, 7.8" STROKE, 16.7" DIE HEIGHT, 3.9" SLIDE ADJUSTMENT,

Description: , Tonnage Capacity: 172 Ton, Bending Capacity: 122", Bed and Ram Length: 120", Distance Between Housings: 102", Bending Speed(s): 3.9" sec., Programmable Controlled Axes: 7, Progr

Description: PRELIMINARY SPECIFICATIONS, NIAGARA OBI PRESS WITH CUSHION, MODEL M-150, YEAR 1964, 150 TON CAPACITY, 8" STROKE, 24" SHUT HEIGHT, 5" ADJUSTMENT, 50" LR X 30" FB BED AREA, 34

Description: , Model: 40, Bending Capability (ton): 250, Table Length (mm): 4000, Distance Between Frames (mm): 3550, Table width (mm): 210, Open Height (mm): 390, Table Height (mm): 910, D

Description: , System Specifications, Hydraulic Press Brake, Capacity : 242 U.S. tons, Bed Length: 168 inches, Maximum Stroke Length : 7.8 inches, Open Height : 18.5 inches, Throat Depth : 16.

Description: PRELIMINARY SPECIFICATIONS, VERSON EXTRUSION PRESS (REBUILT BY VERSON), MODEL S1-800-54-54T, ECCENTRIC GEAR TYPE, SINGLE POINT SUSPENSION, , SINGLE ACTION, DOUBLE GEAR, TWIN DRIVE , 800

Description: PRELIMINARY SPECIFICATIONS, VERSON STRAIGHT SIDE PRESS, MODEL S2-800-108-60T, 800 TON CAPACITY, 16" STROKE, 10" ADJUSTMENT, 46" SHUT FROM BOLSTER (SDAU), 108" LR X 60" FB BED AREA

Investing in new or used metal-forming equipment is normally the first requirement whensetting-up a new fabrication business, or a good way to pump life into an existing one. The market is full of new and used metal-forming machines for sale and new models will appear at MachineSpotter.com every second day. MachineSpotter.com is the go-to industry solution to finding reliable, affordable and wide-ranging metal-forming machines.

Read More

Sponsored links

dugard horizontal
MetalEx 2018
ADIPEC 2018
/banners/_banner_1541094132_Dugard_OpenHouse_468x60.jpg

Featured Video

WANT TO SELL YOUR USED MACHINE?

LARGE NUMBER OF GENUINE BUYERS YOUR USED MACHINES ARE LISTED IN THE INDUSTRY'S MOST CLEARLY CLASSIFIED AND EASY-TO-FIND FORMAT

SPEEDY AND EASY MACHINE SELLING
PROCESS
GET BUYERS DETAIL VIA EMAIL

Sell your machine