=
X Product has been added successfully. See your cart
Make/Model:
AMADA IT 2

Description: AMADA IT 2 - 103 PRESS BRAKE

Description: DURMA ADR 135 TON X 3M PRESS BRAKE

Make/Model:
EDWARDS PEARSON PR

Description: EDWARDS PEARSON PR 100 TON X 3M PRESS BRAKE YEAR 2001

Date of Manufacture: 2001

Description: • 40 – 1,000 tons • 1,250 – 6,100 bending height • 260 – 510mm Stroke

Date of Manufacture: NEW

Description: Serial No.: 02-050-20-178, Year of Manufacture: 1984, Control: Hurco autobend 7, Back gauge: programmable, Guards: optoscan infra-red, Capacity: 50 ton x 2000mm, Between frames: 1690 mm<

Date of Manufacture: 1984

Capacity: 50 ton x 2000mm

Control: Hurco autobend 7

Description: Serial No.: 23081, Year of Manufacture: 06/1996, Control: MNC 95/C, Back gauge: YES, Guards: SICK, Capacity: 220 TON (223,520 KGS) X 6000MM, Maximum length of bend: 6100MM, Between frame

Date of Manufacture: 06/1996

Capacity: 220 TON (223,520 KGS) X 6000MM

Control: MNC 95/C

Description: Serial No.: 98P263, Year of Manufacture: 1998, Control: Cybelec DNC 900, Back gauge: programmable, Guards: " Sick ", Capacity: 100 ton x 3100 mm, Between frames: 2600 mm, Daylight: 350 m

Date of Manufacture: 1998

Capacity: 100 ton x 3100 mm

Control: Cybelec DNC 900

Description: Serial No.: 29279, Year of Manufacture: 2004, Control: Cadman, Back gauge: Programmable, Guards: Lazersafe, Capacity: 80 ton x 2500 mm, Between frames: 2000 mm, Daylight: 480 mm, Throa

Date of Manufacture: 2004

Capacity: 80 ton x 2500 mm

Control: Cadman

Description: Serial No.: 91241, Year of Manufacture: 2005, Control: ATL 550, Back gauge: programmable, Guards: STS infra-red, Capacity: 135 ton x 3000 mm, Maximum length of bend: 3100 mm, Between fra

Date of Manufacture: 2005

Capacity: 135 ton x 3000 mm

Control: ATL 550

Description: Stock Number: kant116, Stroke: 160 mm, Between columns: 3.000 mm, Fabr. nr.: A752

Capacity: 4.050 x 160ton

Description: Stock Number: kant118, Stroke: 80 mm, Strokes per min: 30 / 60, Mechanical driven with air clutch

Capacity: 2.500 x 90 ton

Make/Model:
Colly 3.000 x 140

Description: Stock Number: kant099, Deep troath: 310 mm, Stroke: 250 mm, Daylight without tools: 520 mm

Capacity: 3.000 x 140 ton

Description: Stock Number: kant156

Date of Manufacture: 1980

Capacity: 4.000 x 165 ton

Control: Delem

Description: Serial No.: 97P281, Year of Manufacture: 1997, Control: Cybelec DNC 800, Back gauge: Programmable, Guards: infra red, Capacity: 250 ton x 4100 mm, Maximum length of bend: 4100 mm, Betwee

Date of Manufacture: 1997

Capacity: 250 ton x 4100 mm

Control: Cybelec DNC 800

Description: Serial No.: 8630-1011, Year of Manufacture: 1986, Maximum length of bend: 4050 mm, Between frames: 3100 mm, Daylight: 500 mm, Throat depth: 300 mm, Stroke length: 250 mm, Input: 400/3/50

Date of Manufacture: 1986

Description: Serial No.: 2439, Control: Cybelec euro, Back gauge: programmable , Guards: "sick", Maximum length of bend: 3100 mm, Between frames: 2590 mm, Daylight: 400 mm, Throat depth: 250 mm, St

Control: Cybelec euro

Description: Serial No.: 7323127214, Year of Manufacture: 2012, Control: Durma DU 6000, Back gauge: programmable, Guards: Fiessler infra - red, Capacity: 135 ton x 3000 mm, Between frames: 2595 mm, D

Date of Manufacture: 2012

Capacity: 135 ton x 3000 mm

Control: Durma DU 6000

Description: Serial No.: 2617, Year of Manufacture: 1990, Control: Cybelec euro, Back gauge: Programmable, Guards: "sick", Capacity: 100 ton x 4100 mm, Between frames: 3700 mm, Daylight: 380 mm, Th

Date of Manufacture: 1990

Capacity: 100 ton x 4100 mm

Control: Cybelec euro

Description: Serial No.: 013936, Year of Manufacture: 1995, Control: delem DA21E, Back gauge: programmable, Guards: Infra red, Capacity: 35 ton x 2000mm, Between frames: 1545 mm, Daylight: 300 mm,

Date of Manufacture: 1995

Capacity: 35 ton x 2000mm

Control: delem DA21E

Description: Back gauge: programmeable, Capacity: 200 ton x 5000 mm, Between frames: 4500 mm, Daylight: 400 mm, Throat depth: 400 mm, Stroke length: 100 mm

Capacity: 200 ton x 5000 mm

Investing in new or used metal-forming equipment is normally the first requirement whensetting-up a new fabrication business, or a good way to pump life into an existing one. The market is full of new and used metal-forming machines for sale and new models will appear at MachineSpotter.com every second day. MachineSpotter.com is the go-to industry solution to finding reliable, affordable and wide-ranging metal-forming machines.

Read More

Sponsored links

Expo Manufactura 2019
Mazak
Muller Machines SA - Your Partner For 100 Years
/banners/_banner_1544101019_Dugard_OpenHouse_468x60.jpg

Featured Video

WANT TO SELL YOUR USED MACHINE?

LARGE NUMBER OF GENUINE BUYERS YOUR USED MACHINES ARE LISTED IN THE INDUSTRY'S MOST CLEARLY CLASSIFIED AND EASY-TO-FIND FORMAT

SPEEDY AND EASY MACHINE SELLING
PROCESS
GET BUYERS DETAIL VIA EMAIL

Sell your machine