=
X Product has been added successfully. See your cart
Make/Model:
Schiess / KE160

Description: Stock Number: draai699, Max. swing: 1.800 mm ø, Turningheight: 1.450 mm, Revolutions of table: 3,8 - 191 rpm

Make/Model:
Diedesheim / V80

Description: Stock Number: draai570, Chuck diam: Hydr.: 800 mm ø, Max. swing: 1.000 mm ø, Turningheight: 1.000 mm, Control: CNC Siemens Sinumerik systeem 3, Hydr. 3 Jaw: 800 mm ø, With 4 fold tool

Date of Manufacture: 1987

Make/Model:
Morando / VK09

Description: Stock Number: draai691, Chuck diam: 900 mm ø, Max. swing: 1.400 mm ø, Turningheight: 900 mm, Engine power: 31 kW, Machine weight: 11.000 kg

Description: The combined turning and grinding center VSC 400DS combines the advantages of, vertical hard turning with the advantages of grinding, on a single machine, in, a single set-up. The turning and gr

Make/Model:
Stanko / 15131M

Description: Stock Number: draai652, Chuck diam: 1.120 mm ø, Max. swing: 1.500 mm ø, Turningheight: 1.100 mm, Number of toolposts: 5, Motor: 30 kW

Make/Model:
Morando / KN 17

Description: Stock Number: draai697, Chuck diam: 1.700 mm ø, Max. swing: 1.900 mm ø, Turningheight: 1.350 mm, Engine power: 62 kW, Incl. digital read-out Incl. side support

Make/Model:
VTC-6070 / 6070

Description: Stock Number: draai340, Chuck diam: 500 mm ø, Max. swing: 600 mm, Turningheight: 700 mm, Max swing over bed: 800 mm, Max torque: 840 Nm, Rapid speed X/Z axis: 10 / 15 m/min, Control: Si

Description: EQUIPPED WITH:, 10" 3 Jaw Chuck, Air Cylinder for Chuck, 6 Position Turret, Coolant Pump, Tool Post, 440V, 3PH, 60 Cycles, SPECIFICATIONS:, Swing Over Ways:15", Carriage Tra

Make/Model:
VTC-8080 / 8080

Description: Stock Number: draai342, Chuck diam: 630 mm ø, Max. swing: 800 mm, Turningheight: 800 mm, Control: Siemens 840D, Max torque: 2.200 Nm, Rapid speed X/Z axis: 10 / 15 m/min, Tool changer:

Date of Manufacture: 2008

Make/Model:
Hapremec / VCE 140o

Description: Stock Number: draai396, Chuck diam: 1.200 mm, Max. swing: 1.400 mm, Turningheight: 1.200 mm, Vertical travel of RAM (on ballscrew): 550 mm, Longitudinal travel of RAM (on ballscrew): 700 mm<

Date of Manufacture: 1989

Make/Model:
Cincinnati

Description: Stock Number: draai455, Chuck diam: 2.000 mm ø, Max. swing: 2.250 mm ø, Turningheight: 1.900 mm, Stroke support: 900 mm, Stroke side support: 800 mm

Make/Model:
Burkhardt en Weber

Description: Stock Number: draai462a, Chuck diam: 2.450 mm ø, Max. swing: 3.500 mm ø, Turningheight: 1.000 mm, Control: Siemens Sinumerik, Toolpost X/Y: 600 / 500 mm, CNC turningmachine for flanging

Make/Model:
Stanko / 1512

Description: Stock Number: draai489, Chuck diam: 1.130 mm ø, Max. swing: 1.500 mm ø, 3-/4-jaw: 3 : 1.130 mm ø

Date of Manufacture: 1977

Make/Model:
Schiess / KE160 125A

Description: Stock Number: draai521, Max. swing: 1.800 mm, Turningheight: 1.250 mm, Table: 1.600 mm, Motor: 30 kW, Digital read out 4-Jaw

Make/Model:
Stanko / 1512

Description: Stock Number: draai551, Chuck diam: 1.120 mm, Max. swing: 1.400 mm, Turningheight: 1.100 mm, Installed capacity: 30 kW

Make/Model:
Jungenthal / DK 1200

Description: Stock Number: draai561, Max. swing: 1.400 mm ø , Turningheight: 1.200 mm , Diam. table: 1.100 mm ø

Make/Model:
Berthiez / TFM100

Description: Stock Number: draai610, Chuck diam: 1.000 mm ø, Max. swing: 1.400 mm ø, Turningheight: 1.000 mm ø, Motor: 55 kW, With digital read-out No clampingjaws

Make/Model:
GTC-20090 / 20090

Description: Stock Number: draai612, Chuck diam: 1.600 mm ø, Max. swing: 2.000 mm ø, Turningheight: 1.600 mm, Control: Siemens 810D, Main motor: 55, Max. torque: 20.000 Nm, Tool changer: 12

Date of Manufacture: 2007

Description: Stock Number: draai630, Chuck diam: 1.000 mm, Max. swing: 1.400 mm, Turningheight: +/- 1.400 mm, Control: Siemens 850 M/E, With driven tooling Tooling not available

Date of Manufacture: +/- 1987

Description: Stock Number: draai641, Chuck diam: 2.200 mm ø, Max. swing: 2.400 mm ø, Turningheight: 1.700 mm, Control: Siemens Sinumerik 840C, Number of toolposts: 60, Table speed: 3,15-280 RPM, Ma

Date of Manufacture: 2000

MachineSpotter.com lists a wide variety of metal-cutting machines tools for sale. You can explore our inventory to select used and new metal-cutting machines in accordance with your specific business requirements, regardless of whether you’re a multi-national blue-chip OEM or a family-run subcontractor.

Read More

Sponsored links

Southern Manufacturing 2019
Muller Machines SA - Your Partner For 100 Years
SteelFab 2019
/banners/_banner_1544101019_Dugard_OpenHouse_468x60.jpg

Featured Video

WANT TO SELL YOUR USED MACHINE?

LARGE NUMBER OF GENUINE BUYERS YOUR USED MACHINES ARE LISTED IN THE INDUSTRY'S MOST CLEARLY CLASSIFIED AND EASY-TO-FIND FORMAT

SPEEDY AND EASY MACHINE SELLING
PROCESS
GET BUYERS DETAIL VIA EMAIL

Sell your machine