• Turning Centres
    United Kingdom
    Make/Model:
    Description:
    Haas sl10ce, 2006, s/ntba, kitagawa b206 165mm chuck, max turn dia 279mm, max turn length 356 mm, bar cap 44mm, 11.2kw, 6000rpm, 12 stn turret, toolsetter, parts catcher, no tailstock, swarf auger, tool probe
  • Turning Centres
    United Kingdom
    Description:
    Mazak vtc800/30sr 5 axis vertical travelling column, 2016, 271452, mazatrol matrix 2 control, 4th & 5th axis 500mm dia, table 3500 x 820mm, trav 3000 x 800 x 720mm, spindle head rotation +/- 110 degrees, nc rotary table 360,000 degrees, 48atc, cat40, rapids 50m/min, 18,000rpm, 7...
  • Turning Centres
    United Kingdom
    Make/Model:
    Description:
    Xyz proturn slx1630, 2011, s/ntba, 3 jaw chuck, qctp, swing over bed 400mm, swing over cross slide 218mm, distance between centres 760mm, spindle bore 54mm, 2500rpm, 5.75kw
  • Turning Centres
    United Kingdom
    Description:
    Broadbent stanley pa50, 2005, s/n bsl0107, swing over saddle 1,000mm dia, turning length 2,500mm, distance between centres 3,000mm
  • Turning Centres
    United Kingdom
    Description:
    Colchester tornado 220: 2001, serial t40012,fanuc 21i-tb, swing 510mm, maximum turning length 540mm spindle centre height (from floor) 960mm, spindle nose a2-6, power chucking system hydraulic, spindle bore 77.5mm, bar capacity – collet 65mm, hydraulic tailstock, maximum spindle ...
  • Turning Centres
    United Kingdom
    Make/Model:
    Description:
    Tongtai ta20lmb, 2012, s/n u20195, fanuc 18itb control, sub spindle, driv tooling, short mag bar feed, collet chucks main & sub spindle, 3 driv holders, toolsetter, 12 stn turret, swarf conveyor, parts conveyor, max turning dia 335mm, bar cap 51mm
  • Turning Centres
    United Kingdom
    Description:
    Emag vl3 vertical turning lathe, ser no 00vs2550 09, 2000, control fanuc 21i-t, max diameter: 210mm, max. machining height 100mm, movement (x/z) : 400 / 200mm, rapids (x/z) : 60 / 30 [m/min], turret 12 position, tooling vdi40, spindle nose a2-5, spindle power 16 kw, spindle speed...
  • Turning Centres
    United Kingdom
    Description:
    emco 365mc y axis, 2004, s/n r6a v12 r6cs2401, siemens 840d control, c & y axis, 12 stn turret, mx1b short mag bar feed, multibore collet chuck main spindle, collet chuck dead length sub spindle , parts catcher, max turning dia 420mm, max turning length 520mm, 65mm bar feed cap...
  • Turning Centres
    United Kingdom
    Description:
    Doosan z290smy cnc lathe, 2006, ser no lxh1029, fanuc 18i tb control, twin turret, sub-spindle, c & y axis, upper turret travel x165mm z 600mm, lower turret travel, 165mm, z600mm, collet chuck on main and sub-spindle, 12 stn vdi30 upper turret, 8 stn vdi30 lower turret, parts c...
  • Turning Centres
    United Kingdom
    Make/Model:
    Description:
    Nakamura tw10mm, 1998, s/n w105809, fanuc 18ti control, 6 axis, lns ecoload short mag bar feed, twin 12 stn turret, full c axis & driv tools, toolsetting eyes, collet chuck, 3-jaw chuck, 12 stn turrets, q setters, renishaw probe, parts catcher, swarf conveyor, 42mm bar cap.
  • Turning Centres
    United Kingdom
    Make/Model:
    Description:
    Colchester combi k4: 2004, serial c50046, fanuc 210i-ta control, spindle 1,800 rpm, swing 554mm, swing over cross slide 370mm, distance between centres 1016mm, x axis cross slide travel 290mm spindle nose (camlock)d1-11, spindle bore 102mm, spindle motor 18.5/22kw, tailstock no....
  • Turning Centres
    United Kingdom
    Description:
    Colchester combi 2000 lathe, 1999, s/n e70075, ge fanuc 210i-t, 10? 3-jaw chuck, qctp, swing over bed 400mm, swing over cross slide, 246mm, swing in gap 585 x 165mm, tailstock – 5mt, 54mm spindle bore, distance between centres – 1,250mm (50?), spindle speed 12 to 2,500rpm
  • Turning Centres
    United Kingdom
    Make/Model:
    Description:
    Mazak slant turn 50n, 1998, s/n 187875, mazatrol t plus control, 500mm powered chuck, 15 stn turret, toolsetter, swarf conveyor. note no tailstock,660mm turning dia, bar capacity 90mm, 38kw. ex rolls royce

MachineSpotter.com lists a wide variety of metal-cutting machines tools for sale. You can explore our inventory to select used and new metal-cutting machines in accordance with your specific business requirements, regardless of whether you’re a multi-national blue-chip OEM or a family-run subcontractor.

Read More