• Radial Drills
    France
    Description:
  • Radial Drills
    United Kingdom
    Description:
    Spindle radius 36, traverse of saddle 26, vertical travel of spindle 7 , spindle bore morse no.3, drills up to 1 , taps up to whit, spindle to base 46, spindle to table 28 , table size 30x22, 18 spindle speeds, 50-1500 rpm, low volt light, electronic spindle braking...
  • Radial Drills
    United States of America
    Description:
    Column diameter:304.80mmface of column to center of spindle:1270.00mm maximumminimum spindle radius:330.20mmmaximum spindle to base:1371.60mmminimum spindle to base:457.20mmworking surface of base:1320.80mm x 762.00mmfeeds:0.10m...
  • Radial Drills
    United States of America
    Description:
    Arm length:2438.40mmcolumn diameter:482.60mmdrilling capacity (steel):76.20mmdrilling capacity (cast iron):92.08mmspeeds:20 - 1180 rpmfeed:0.00 mm/sec -0.05 mm/secspindle taper:#5 mtdistance column to spindle center:419....
  • Radial Drills
    United States of America
    Description:
    Arm length:1828.80mmcolumn diameter:431.80mmspindle speeds:14-1700 rpm (36 steps)spindle feeds:0.1 mm/rev - 3.175mm/revtap leads:8 - 27 tpispindle stroke:457.20mmspindle diameter:106.36mmspindle motor:14.91 kwspindle...
  • Radial Drills
    United States of America
    Description:
    Arm length:1219.20mmcolumn diameter:381.00mmdrills to center of circle on base:2438.40mmmaximum distance, spindle to base:1676.40mmminimum distance, spindle to base:215.90mmtraverse of drill head on arm:863.60mmtraverse of arm on co...
  • Radial Drills
    United States of America
    Description:
    Arm length:1219.20mmcolumn diameter:279.40mmworking surface of base:1498.60mm x 914.40mmdrills in plane of base to center of circle:2438.40mmdistance from center of column to face of column:231.78mmminimum distance face of column to spindle...
  • Radial Drills
    United States of America
    Description:
    Diameter of column:330.20mmdrills to center of circle on base:2438.40mmspindle to base:152.40mm - 1524.00mmspindle speeds:25 - 2000 rpmspindle travel:457.20mmspindle taper:#5mttraverse of drill head on arm:882.65mmtraverse o...
  • Radial Drills
    Netherlands
    Description:
    Machine number: 29001
    taper: mt 5
    radius (mm): 1250
    drilling capacity (mm): 55
    r.p.m. spindle: 22,4 - 900 (9x)
    kw: 4
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Description:
    Machine number: 77061
    taper: mt 6
    max. distance floor plate - spindle (mm): 2100
    radius (mm): 2250
    drilling capacity (mm): 100 - 120
    r.p.m. spindle: 4 - 1800 (21x)
    kw: 15
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Make/Model:
    Description:
    Machine number: 2705
    taper: mt 5
    radius (mm): 1250
    drilling capacity (mm): 60
    r.p.m. spindle: 28 - 2500
    kw: 4
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Description:
    Taper: iso 50
    max. distance floor plate - spindle (mm): 2000
    vertcal travel arm (mm): 1050
    radius (mm): 2700
    drilling capacity (mm): 100
    r.p.m. spindle: 9 - 1.800 (24x)
    kw: 14,2
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Description:
    Machine number: 13980
    taper: mt 5
    max. distance floor plate - spindle (mm): 1700
    radius (mm): 2000
    drilling capacity (mm): 75
    r.p.m. spindle: 19 - 1900 (21 x)
    kw: 11
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Make/Model:
    Description:
    Machine number: 13593
    taper: mt 5
    radius (mm): 1600
    drilling capacity (mm): 60
    r.p.m. spindle: 30 - 1300
    kw: 5,5
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Make/Model:
    Description:
    Taper: mt 5
    radius (mm): 2300
    r.p.m. spindle: 42 - 1.130(12x)
    kw: 5,5
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Make/Model:
    Description:
    Taper: mt 5
    radius (mm): 2000
    r.p.m. spindle: 31 - 810 (12x)
    kw: 4
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Description:
    Machine number: 9835
    taper: mt 5
    radius (mm): 1250
    r.p.m. spindle: 30 - 1.200 (12x)
    kw: 3
    volts: 380v
    cycles: 50
  • Radial Drills
    Netherlands
    Make/Model:
    Control:
    Heidenhain TNC 145
    Description:
    Spindle diameter (mm): 85
    taper: iso 40
    max. distance between columns (mm): 1600
    max. distance between spindle - table (mm): 1030
    table (mm): 1.000 x 1.600
    max. load: 2000
    r.p.m. spindle: 28 - 2500
    kw: 4
    volts: 380v
    cycles: 50
  • Radial Drills
    United States of America
    Make/Model:
    Description:
    Preliminary specifications:arboga model er 1830year 199524" x 20" adjustable table24" x 24" base8" columnequipment & featuresmotor and controls adjustable, tilting tablehand crankrevolution per minute / motor speeds1085/540 705/305 305/150 200/100great running drill, perfec...
  • Radial Drills
    United States of America
    Make/Model:
    Description:
    Drilling capacity2"tapping capacity1-3/8"column diameter9"arm length40"head traverse on arm28"arm traverse on column26-1/2"bearing length arm on column19-1/2"distance spindle nose to base50-1/2" / 16"spindle travel in head10"taper in spindleno. 4mtspindle diameter at driven end1-...

MachineSpotter.com lists a wide variety of metal-cutting machines tools for sale. You can explore our inventory to select used and new metal-cutting machines in accordance with your specific business requirements, regardless of whether you’re a multi-national blue-chip OEM or a family-run subcontractor.

Read More