=
X Product has been added successfully. See your cart

Description: Capacity: 3mm Minimum - 50mm Maximum, Angle range: 25 Degrees-55 Degrees, Input: 415/3/50 ac 4 kW, Support roll rise & fall: 50mm, Fitted with: 1 x Cutter, Length: 4'6" / 1.37m, Width: 3'6" / 1.07m

Capacity: 3mm Minimum - 50mm Maximum

Description: Serial No.: 4266, Year of Manufacture: 1979, Capacity: With Appropriate Rolls, Angles (Leg-Out): 6" x 6" x 7/8" / 152mm x 152mm x 22mm, Angles (Leg-In): 6" x 6" x 3/4" / 152mm x 152mm x 19mm, "T" Section (Leg-Out): 6" x 6" x 5/8" / 152mm x 152mm x 15mm, "T" Section (Leg-In): 6" x 6" x 5/

Date of Manufacture: 1979

Capacity: With Appropriate Rolls

Make/Model:
SMTW 1000

Description: Serial no. M1332B,

Date of Manufacture: 1978

Capacity: 14" x 40"

Make/Model:
SMTW 1000

Description: Serial no. M1332B,

Date of Manufacture: 1978

Capacity: 14" x 40"

Description: Stocknumber: 010608, Serialnumber: 32 581249-25, Swing 325, mm Turning diameter, 250 mm, Center distance 500, mm Longd. travel, 550 mm, Crosstravel 220, mm Spindle speed, 0-4500 rpm, Longd. feed 0-8000, mm/min Cross feed, 0-4000 mm/min, Rapid traverse 10000/5000, mm/min

Date of Manufacture: 1982

Description: Stocknumber: 010610, Serialnumber: 37 591234-27, E-Mail: This info is to the best of our knowledge, but is not binding in detail.

Description: Machine number:36/595093/23, Control:CNC 300, Centre distance (mm):2250, Max swing over bed (mm):720, Max swing over cross slide (mm):480, Spindle bore (mm):110, R.P.M.:125 - 1500, kW:44, Volts:380V, Cycles:50, 3-Jaw chuck ø (mm):650,

Description: STANDARD SPECIFICATIONS, HAAS EC-500 HORIZONTAL MACHINING CENTER , TRAVELS, X AXIS: 32", , YAXIS: 20", , Z AXIS: 28", , A AXIS INDEXING INCREMENT: 1 degree , , SPINDLE, SPINDLE MAX RATE: 20HP, , MAX SPINDLE SPEED: 8000RPM, , MAX TORQUE: 75 FT-LB @ 1400 RPM,

Make/Model:
SMT Pullmax / X10

Description: Stock Number: las218, Platethickness: 50 mm, Bevelling-angle: 35°, Beveling depth in steel: 40 kg/m2 13 mm, Bevelling-depth VA-steel: 10 mm, Engine output: 1,5 kW

Make/Model:
SMT Pullmax / X10

Description: Stock Number: las218a, Platethickness: 50 mm, Bevelling-angle: 35°, Beveling depth in steel: 40 kg/m2 13 mm, Bevelling-depth VA-steel: 10 mm, Motor: 1,5 kW

Make/Model:
SMT Pullmax / X10

Description: Stock Number: las218b, Platethickness: 50 mm, Bevelling-angle: 35°, Beveling depth in steel: 40 kg/m2 13 mm, Bevelling-depth VA-steel: 10 mm, Motor: 1,5 kW

Sponsored links

Subcon 2018
/banners/_banner_1451905887_Dugard_MTIBanner.gif

Featured Video

WANT TO SELL YOUR USED MACHINE?

LARGE NUMBER OF GENUINE BUYERS YOUR USED MACHINES ARE LISTED IN THE INDUSTRY'S MOST CLEARLY CLASSIFIED AND EASY-TO-FIND FORMAT

SPEEDY AND EASY MACHINE SELLING
PROCESS
GET BUYERS DETAIL VIA EMAIL

Sell your machine