=
X Product has been added successfully. See your cart
Order By:

Description: Serial No.: NVCA2D0028, , Year of Manufacture: 2002. , Control: Siemens Sinumerik Shopmill 810D, Table size: 1120 mm x 510 mm, Longitudinal traverse: X axis 1020 mm, Cross traverse: Y axis 510 mm, Vertical traverse: Z axis 510 mm, Speeds: up to 8,000 rpm, Feed rate: Variable, Spind

Date of Manufacture: 2002.

Control: Siemens Sinumerik Shopmill 810D

Description: Name of machine: Hardinge Talent 6/45-SV, YOM: 2006, Stock Number: clu/0130, This , Hardinge Talent 6-45 SV, Slant bed CNC Lathe with Fanuc Series Oi-TB Control was built in 2006 and supplied as new in 2007. This machine has no tailstock, a 16C collet adaptor and turret tooling., Very L

POA

Description: , EQUIPPED WITH:, Fanuc 18-T Control, Sub-Spindle W/Collet, 12-Position Turret, Flood & High-Pressure Coolant, Chip Conveyor, SPECIFICATIONS:, Max. Swing: 21.2", Max. Turning Diameter: 9", Max. Turning Length: 13.82", Travel X: 5.31", Travel Z: 13.9", C Axis In

Description: Name of Machine: Hardinge Talent 6-45 SV, YOM: 2006, Stock Number: clu/0120, This , Hardinge Talent 6-45 SV, Slant bed CNC Lathe with Fanuc Series Oi-TB Control was built in 2006 and supplied as new in 2007. Very little used all its life by its one owner...(Note we have another identical

Sold

Description: Name of Machine : Hardinge VMC 600II Siemens 810D, YOM :, Stock Number : cmu/0114, Hardinge VMC 600II Siemens 810D with Shopmill, Table Size: 750mm x 510mm, Travels:, X-Axis 600mm, Y-Axis 510mm, Z –Axis 510mm, Max load 700Kgs, Spindle Speed Range: 0 to 8000RPM, Torque: 100 NM

Sold

Description: Name of Machine: Hardinge Bridgeport 650 BP3, YOM: 2006, Stock Number: cmu/0137, Hardinge Bridgeport 650BP with Siemens 810D & Shopmill Control, 800mm x 470mm Table, Traverses X Axis 660mm, Y Axis 510mm, Z Axis 500mm, Supplied with 4, th, Axis Drive, 8,000 RPM, Thru Spindle Cool

POA
Make/Model:
HARDINGE DV-59

Description: Specifications, Swing Over Bed:, 9", Length of Bed:, 30", Width of Bed:, 3.3", Spindle Capacity:, 1.06", Speed (Variable):, 230 - 3500 RPM, Equipped With, 5" 3-Jaw Chuck, 6-Position Indexing Turret Tailstock, 5C Collet Closer, Production Cross Spindle,

Date of Manufacture: N/A

Make/Model:
HARDINGE HC

Description: Specifications, Max Swing Over Bed:, 11", Max Swing Over Carriage:, 9", Max Swing Over Cross Slide:, 5.75", Compound Slide Travel:, 3", DISTANCE BETWEEN CENTERS, ., - Tailstock Flush:, 18", - Tailstock Overhung:, 20", Power Feed Range:, 0.25 IPM - 7 PM

Date of Manufacture: N/A

Make/Model:
Hardinge GT 27 SP

Description: Name of Machine : Hardinge GT 27 SP, YOM :, Stock Number : clu/0106, 2 available, one with BF, one without, Hardinge Conquest GT (Gang Tool) 27mm capacity high precision CNC lathe fitted C Axis & Driven tooling, Hydra Feed short magazine bar feed., Specification:, Control : Fanuc 18, N

£11,500 +V

Description: Name of Machine : Hardinge Conquest T42, YOM :, Stock Number : clu/0107, Briefly, this Fanuc controlled 1998 built , Hardinge Conquest T42 LTC, is supplied with driven tools and index-able C-Axis, tailstock and parts catcher., Swing Over Bed: 495mm/19.5", Maximum Turning Diameter: 2

£18,500 +V

Description: stock no.: 19667

Description: Code: ST2616, Model: HLV-H, Speeds: 125-3000 RPM Variable, Feeds: Variable, Machine With: 3 Jaw Chuck, Taper Turning, Collet Chuck, Collets

Capacity: 254 x 457mm

Description: , EQUIPPED WITH:, Allen Bradley Series 9 Control, Hydraulic Chucking, 12 Station Turret, Tailstock W/ Live Center, Montrix TS100 Tool Monitoring, 10hp Spindle, Vicker Hydraulics, 3 Axis Pick-N-Place Robot, Transformer, 480 Volt, 3Ph, 60 Cycle, Spindle Speeds Up to

Description: , EQUIPPED WITH:, Allen Bradley Series 9 Control, 12 Station Turret, Tailstock W/ Live Center, Vicker Hydraulics, 10 HP Spindle, 480 Volt, 3 PH, 60 Cycle, Montrix TS100 Tool Monitoring, Hydraulic Chucking, 120" X 8' X 7'6", Transformer, 3 Axis Pick-N-Place Robot

Description: , EQUIPPED WITH:, Allen Bradley Series 9 Control, 3 Axis Pick-N-Place Robot, Chiller, Montronix TS100 Tool Monitoring, RS232, Thermal Transform Products, Pulse Generator, Spindle Speeds Up To 3,000 RPM, Tailstock, Work Light, SPECIFICATIONS:, AC Digital Spindle

ADIPEC Awards - Excellence in Energy 2017

machinespotter.com

machinespotter.com

machinespotter.com

machinespotter.com

machinespotter.com
machinespotter.com