=
X Product has been added successfully. See your cart
Order By:

Description: Hardened rolls, taper attm., profile rolls. Stocknumber:, 180347 Serialnumber:, M200-084 Sheet thickness, 6 mm, Prebending 5, mm Roll diameter, 200 mm, Speed 5, m/min Motor, 5,5 kW

Date of Manufacture: 2008

Description: Serial No.: 22090, Capacity: 0.8mm - 1.6mm, Number of stations: 7, Table size: 57" x 24" / 1448mm x 610mm, Input: 380/420/3/50 ac 1.5 hp approx, Machine set for: Pittsburg & Double Seam, F

Capacity: 0.8mm - 1.6mm

Description: Serial No.: 22319, Capacity: 0.8mm - 1.6mm, Number of stations: 7, Table size: 57" x 24" / 1448mm x 610mm, Input: 380/420/3/50 ac 1.5 hp approx, Machine set for: Pittsburg & Double Seam, F

Capacity: 0.8mm - 1.6mm

Description: Serial No.: 10118, Capacity: 16g / 1.5mm, Number of stations: 9, Table size: 59.1/2" x 24" / 1511mm x 610mm, Input: 380/420/3/50 ac 1.5 hp, Machine set for: Double Seam and Standing Seam,

Capacity: 16g / 1.5mm

Description:

Description: Stocknumber: 180338, Serialnumber: Capacity angle iron, 60x60x5 mm, Capacity roundbar 35, mm Kapacitet square pipe, 60x60x3 mm, Speed 13, rpm Motor, 2,2 kW, Weight 450, kg E-Mail:

Description: Stocknumber: 180339, Serialnumber: Capacity angle iron, 50x50x5 mm, Capacity roundbar 30, mm Capacity square pipe, 50x50x2,5 mm, Speed 9,3, rpm Motor, 1,5 kW, Weight 425, kg E-Mail

Description: Work mode Roll forming unit, Material thickness x width W 1064 mm, Numbre of sections 16 stations, DECOILER(s) Yes, Max weight admit 10 Ton, CUTTING DEVICE Flying Shear, Stacking device ye

Description: Stocknumber: 180337, Serialnumber: Working width, 1270 mm, Sheet thickness 1,5, mm Daylight, 45 mm, Banding angle 150, deg. Weight, 465 kg, E-Mail: This info is to the best of our kn

Description: Stocknumber: 180340, Serialnumber: Working length, 1300 mm, Sheet thickness 4,5, mm Roll diameter, 120 mm, Bar bending 6, 8, 10, mm Motor, 2,5 kW, Weight 750, kg E-Mail:

Description: total pressure: 5000 t, distance between columns: 2530 mm, ram pressure: 315 t, slide stroke: 700 mm, short stroke cylinder pressure: 5000 t, short stroke cylinder - working stroke: 11 mm

Date of Manufacture: 2000

Control: PLC (Siemens S 7)

Description: Extra Info: Type: PU150PEquipment for mixing 2 components and applying via spraygun- 2 pistols- 2 tanks- main motor: 25/33 kW - 18/24 HP- 7 bar- Isocyanate / PIR / PUR / MDIOptionalPIR/PU 600 ton sand

Description: Extra Info: Hydraulic heated sandwichpanel press (discontinuous) max open: 170 mm max workpiece width: 2320 mmmax workpiece length: 7000 mmmax: 120° C - both upper and lower table heatedlower table e

Make/Model:
Götened KR 7E

Description: Stocknumber: 180341, Serialnumber: Capacity, 2,5 mm, Working length 2050, mm Motor top beam, 1 hp, E-Mail: This info is to the best of our knowledge, but is not binding in detail.

Make/Model:
RAS 64.25

Description: Presetting of bending angle, backguage adjustable from frontside. Stocknumber:, 180342 Serialnumber:, 98/3 Sheet thickness, 2,5 mm, Working width 2540, mm Min bending radius, 1,25x thickne

Make/Model:
R A S 22.15

Description: Used RAS 22.15 Lockformer, Serial No:, 222/1, Specification:, Capacity 1.5mm , Motor 2.2kw , Weight 290kg , Electrics 415/3/50, Complete with:, 7 Stations, Double seam, Pittsburgh

Make/Model:
STEMA-PEDAX 18XV

Description: Specifications, Grade of Steel:, 101,500 PSI (max), Wire Diameter:, 0.236" - 0.708", Rate of Feed:, 492 feet / second, Bending Speed:, 1000° / second, Bending Angle:, +/

Date of Manufacture: 2003

Make/Model:
CONTOUR 1532406-CE

Description: Specifications, Number of Stands:, 32, Number of 4-Stand Rafts:, 8, Shaft Diameter:, 2-1/2", Roll Space:, 40", Horizontal Distance Between Centers:, 8", Vertical Dista

Date of Manufacture: 1996

Make/Model:
FLOTURN B-100H

Description: Specifications, Minimum I.D.:, 8", O.D. Range:, 17" 26" & 40", Maximum O.D. with 3-Roller Bending:, No Limit, Face Plate Rotations:, 2/3/5 RPM, CAPACITIES:, ., Flat on

Date of Manufacture: N/A

Make/Model:
RESENER 3" I/O

Description: Specifications, Maximum Diameter:, 3" O.D. x 13 Ga., Minimum Diameter:, 1/2" O.D. x 13 Ga., Maximum Work Length:, 4" (Approx.), Minimum Diameter, Expansion:, 1-1/4", Minimum

Date of Manufacture: N/A