=
X Product has been added successfully. See your cart
Make/Model:
MG Model AR 110

Description: Double Pre Bend Section Bending Rolls, with Hydraulic Guides. Capacities:- Flats on Flat 180mm x 30mm, Angles 100mm x 100mm x 10mm, 7.5HP Motor. Standard formers & tube formers : 115 mm dia., 90 mm d

Date of Manufacture: 2001

Make/Model:
ROUNDO Model R5

Description: Double Pre Bend Section Bending Rolls. Capacities :- Flats on Flat 250mmx 30mm, Angles 120mm x 120mm x 12mm. 7.5 KW motos. Standard formers and some tube formers. New 1996

Date of Manufacture: 1996

Make/Model:
ROUNDO Model R-7-S

Description: Double Pre Bend Section Bending Rolls. Capacities :- Flats on Flat 350mm x 50mm, Angles 160mm x 160mm x 20mm. 30 KW motor. Standard formers and some large tube formers. New 1998

Date of Manufacture: 1998

Description: 2500mm x 8mm Rolling, 3 Roll Initial Pinch Plate Bending Rolls. Pre-bend 6 mm, Rolls. Top Roll 228 mm diameter.

Make/Model:
ROUNDO Model PS255

Description: 2500 x 15 mm Rolling, 3 Roll Double Pinch Pyramid Planetary Plate Bending Rolls. Pre-bend 10 mm, Rolls 255 mm diameter. With side support and top support system, pendant control. New 1994.

Date of Manufacture: 1994

Make/Model:
SERTOM Model EMO 0410

Description: 4000 mm x 16 mm Rolling, 3 Roll Variable Geometry Plate Bending Rolls. Pre-bend 4000mm x 10 mm, Power Adjustment to Top Roll. Powered Lateral Movement to Bottom Rolls.

Make/Model:
BIKO Model B3-3128

Description: 3000 mm x 15 mm Rolling, 3 Roll Double Pinch Pyramid Linear Guides Plate Bending Rolls.Pre-bend 12 mm ( 5 x Top roll dia.) Top Roll diameter 285 mm, all 3 rolls driven, cone rolling. New 2012. Little

Date of Manufacture: 2012

Make/Model:
SAHINLER 1270 x 86

Description: Used Sahinler 1270 x 86mm initial pinch power bending rolls, Specification:, Length 1270mm , Rolls dia 86mm , Motor 1.1kw , Electrics 415/3/50, Complete With:, Initial Pinch, Top roll s

£POA
Make/Model:
EDWARDS EGS 80x4

Description: Used Edwards EGS 80x4 geared bending rolls, Specification:, Length 2030mm , Rolls dia 100mm , Capacity 2mm, c:, Wire grooves

£POA

Description: Serial No.: P1206, Capacity: 8' x 3/4" / 2438mm x 19mm, Length of rolls: 97" / 2463mm, Roll diameter: Top 13 1/4" / 336mm, Bottom 10 3/4" / 273mm, Input: 380/3/50 AC 25 hp, Fitted with: righ

Capacity: 8' x 3/4" / 2438mm x 19mm

Description: Serial No.: 500, Year of Manufacture: 1997, Length of rolls: 1270 mm, Roll diameter: 86 mm, Input: 415/3/50, Actuated via: wander type foot switch, Fitted with: top slip roll, Length: 6'

Date of Manufacture: 1997

Description: Serial No.: 1005 PAR 578, Length of rolls: 3000 mm x 6 mm, Roll diameter: 240 mm top roll, 190 mm bottom., Roll rise & fall: top roll by hand, Input: 380/3/50 10hp approx, Fitted with: secti

Description: Serial No.: 1867, Year of Manufacture: 2004, Capacity: 2000 mm x 5 mm, Length of rolls: 2050 mm, Roll diameter: 150 mm, Roll rise & fall: back 100 mm. bottom 10 mm, Input: 415/3/50 3 kw ap

Date of Manufacture: 2004

Capacity: 2000 mm x 5 mm

Description: Serial No.: 84S330027, Capacity: 50" x 14g / 1270mm x 2mm, Length of rolls: 50" / 1270mm, Roll diameter: 4" / 101mm, Roll rise & fall: back roll 3" / 76mm

Capacity: 50" x 14g / 1270mm x 2mm

Description: Serial No.: 11810009, Year of Manufacture: 1976, Capacity: 4000mm x 46mm Rolling or 4000mm x 36mm Pre-Bend , Length of rolls: 4100mm, Roll diameter: Top Roll 730mm, Bottom Rolls 400mm, Roll

Date of Manufacture: 1976

Capacity: 4000mm x 46mm Rolling or 4000mm x 36mm Pre-Bend

Description: Serial No.: 9387-021078, Year of Manufacture: 1978, Capacity: 10' x 1.1/4" / 3048mm x 31.4mm Rolling or 10' x 7/8" / 3048mm x 22mm Pre Bending, Length of rolls: Top 123" / 3124mm, Bottom 122.1/4

Date of Manufacture: 1978

Capacity: 10' x 1.1/4" / 3048mm x 31.4mm Rolling or 10' x 7/

Description: Serial No.: 1988, Year of Manufacture: 1970, Capacity: 2500mm x 10mm Rolling, Cone Rolling 5mm, Prebending 6mm, Length of rolls: 2600mm, Roll diameter: 240mm, Roll rise & fall: Hydraulically

Date of Manufacture: 1970

Capacity: 2500mm x 10mm Rolling, Cone Rolling 5mm, Prebendin

Description: Serial No.: 91142-004, Diameter of rolls: 40mm, Maximum working length: 1860mm, Maximum material thickness: 0.75mm, Input: 415/3/50 ac 1.1 kW, Actuated via: Wander Type Foot Switch, Featur

Description: Serial No.: 69C/26536, Capacity: 8' x 18g / 2438mm x 1.24mm, Length of rolls: 97" / 2464mm, Roll diameter: 4" / 102mm, Roll rise & fall: Top Roll 1" / 25mm, Back Roll 4.1/2" / 114mm, Actuate

Capacity: 8' x 18g / 2438mm x 1.24mm

Description: Serial No.: 94-142-002, Roll diameter: 40mm, Maximum working length: 1860mm, Maximum material thickness: 0.75mm, Input: 415/3/50 ac 1.1 kW, Actuated via: Wander Type Foot Switch, Features:

Investing in new or used metal-forming equipment is normally the first requirement whensetting-up a new fabrication business, or a good way to pump life into an existing one. The market is full of new and used metal-forming machines for sale and new models will appear at MachineSpotter.com every second day. MachineSpotter.com is the go-to industry solution to finding reliable, affordable and wide-ranging metal-forming machines.

Read More

Sponsored links

Subcon 2018
/banners/_banner_1451905887_Dugard_MTIBanner.gif

Featured Video

WANT TO SELL YOUR USED MACHINE?

LARGE NUMBER OF GENUINE BUYERS YOUR USED MACHINES ARE LISTED IN THE INDUSTRY'S MOST CLEARLY CLASSIFIED AND EASY-TO-FIND FORMAT

SPEEDY AND EASY MACHINE SELLING
PROCESS
GET BUYERS DETAIL VIA EMAIL

Sell your machine