=
X Product has been added successfully. See your cart

Description: Specifications, Max. Swing Over Bed:, 33.6", Max. Cutting Length:, 39.7", Distance Between Centers:, 42", Hole-Thru Spindle:, 5.12", Bar Capacity:, 4.75", Spindle Nose

Date of Manufacture: 1998

Description: Stock no.: 1032-02718 , Machine type: Center Lathe , Make: POREBA , Type: TPK 90-A1 / 7 M , Year: 1991 , Control: conventional , Location: Karlsbad - Ittersbach stock 1 , Country of orig

Date of Manufacture: 1991

Control: conventional

Make/Model:
POREBA TCG-200 / 10M

Description: Stock no.: 1032-02569 , Machine type: Center Lathe , Make: POREBA , Type: TCG-200 / 10M , Year: 1972 / 2012 , Control: conventional , Location: Poland , Country of origin: Poland , Ter

Date of Manufacture: 1972 / 201

Control: conventional

Description: Specifications, Maximum Swing:, 28.74", Swing Over Turret 2: , 15.73, Maximum Turning Length:, 59", Bar Work Capacity:, 3.54", Maximum Distance Between Centers:, 73.31"

Date of Manufacture: 12

Make/Model:
OKUMA LB 15

Description: Specifications, Swing over Bed:, 15.75", Max Turning Length: , 19.7", Main Spindle Diameter at Front Bearing:, 3.94", Bore Diameter:, 2.2", Spindle Nose:, ASA A2-6, In

Date of Manufacture: N/A

Make/Model:
DAINICHI MG65X90

Description: Specifications, Dainichi MG65X90 flat bed, 28"x47" , ., Specifications will be available shortly., ., Equipped With, Dimensions and Weight, Call Perfection Global for Dimensions

Date of Manufacture: 1991

Make/Model:
MOTCH 219D

Description: Specifications, Chuck Size:, 24" 3-Jaw on One Side, Maximum Swing:, 25", Maximum Spindle Speed:, 2800 Rpm, Spindle Nose:, A2-11, Spindle Motors:, 50HP, Right Head Cros

Date of Manufacture: 2007

Description: Between centres: 26', Swing over bed: 37", Spindle speeds: 6.3 - 450 rpm, Tail Stock: yes, 4 jaw chuck: 29", Tool post: 4 way clamp type

Description: Specifications, Maximum Swing:, 28.74", Swing Over Turret 2: , 15.73, Maximum Turning Length:, 58.98" , Bar Work Capacity:, 3.54", Maximum Distance Between Centers:, 73.3

Date of Manufacture: 12

Make/Model:
MAZAK ST80NX - 2000U

Description: Specifications, Maximum Swing:, 43.16", Maximum Length:, 80", Spindle Bore:, 7.1", Spindle: , 500 RPM, Bar Capacity:, 6.75", Equipped With, Mazatrol T Plus CNC Cont

Date of Manufacture: N/A

Make/Model:
SCHAUBLIN 102-80 VM

Description: stock no.: 20055

Description: Specifications, Maximum Swing Over Bed:, 35.0", Maximum Swing Over Cross Slide:, 22.0", Distance Between Centers:, 35.4", Max Turning Diameter:, 32.3", Bar Work Capacity:

Date of Manufacture: 1996

Make/Model:
Hardinge GS51

Description: Name of Machine: Hardinge GS51, YOM: 2011, Stock Number: clj/0112, We are delighted to be offering this 2011 built Hardinge GS51-M CNC lathe. The machine is configured with Siemens 828D Control

POA
Make/Model:
MORI SEIKI LL-1500

Description: Specifications, Distance Between Centers: , 60", Hole Thru Spindle: , 3.875", Equipped With, Fagor CNC Controls, 36" or 24" 4-Jaw Chuck, Tool Post , Turret, Dimensions an

Date of Manufacture: N/A

Make/Model:
Hyundai-Kia SKT250

Description: Serial no. P0809,

Date of Manufacture: 2008

Capacity: 10"

Make/Model:
Okuma LU300

Description: Serial no. 128762,

Date of Manufacture: 2007

Capacity: .15"- 4"

Make/Model:
Haas TL1

Description: Name of Machine: Haas TL1, YOM: 2005, Stock Number: clu/0137, A One owner 2005 built Haas TL1 with 3 jaw chuck, quick change tool post, tailstock and coolant equipment. , The machine has had v

POA
Make/Model:
Hardinge SV 200

Description: Name of Machine: Hardinge SV 200, YOM: 2008, Stock Number: clu/0131, 2008 built Hardinge SV 200 2-Axis CNC lathe with Fanuc control, well specified as follows:, 3 Jaw power chuck, tailstock, 1

Sold
Make/Model:
XYZ Proturn SLX 425

Description: Name of Machine: XYZ Proturn SLX 425, YOM: 2011, Stock Number: clu/0133, Used 2011 XYZ Proturn SLX 425 x 1250 with Proturn SLX control, 4 way automatic tool post, new 3 jaw chuck, used 4 jaw chu

Sold

Description: Serial No.: 1222, Height of centres: 500mm, Between centres: 5000mm, Swing over bed: 1000mm, Swing over cross slide: 700mm, Spindle speeds: 4.5 - 900 rpm, Spindle bore: 95mm, Tail Stock:

MachineSpotter.com lists a wide variety of metal-cutting machines tools for sale. You can explore our inventory to select used and new metal-cutting machines in accordance with your specific business requirements, regardless of whether you’re a multi-national blue-chip OEM or a family-run subcontractor.

Read More

Sponsored links

dugard horizontal
Excel Machine Tools
METAV 2018

Featured Video